Lesson plan
Paslode Impulse
Paslode Impulse is a trademarked name for a cordless nail gun manufactured by Paslode. Cordless nail guns do not need an air compressor. Instead, they use what Paslode calls a "fuel cell", but is actually a very small two stroke engine which fires one ignition stroke for each nail driven, and reloads itself from a small metal can filled with pressurized flammable gas (a mixture of propene and but-1-ene). It has a battery pack and a high-voltage power supply, to deliver a spark. The combustion chamber is divided in two parts and is normally open to the atmosphere. When the contact tip is pushed onto a piece of work, the lower piston chamber (which also serves as the piston bore) is pushed into the upper part, sealing it. Simultaneously, a metered amount of fuel is squirted into the chamber from the fuel container. When the trigger is pulled, a spark plug ignites the fuel charge, pushing the piston and connected drive pin to the bottom of the chamber and driving a nail. A small amount of combustion gas is briefly stored in a side chamber and is used to push the piston back into the ready position after the nail is driven. After the contact tip is lifted from the work, the combustion chamber opens and a small fan blows away the exhaust gas. Pressing the contact tip to the work without pulling the trigger uses one of the metered fuel charges.…
Article summary
Paslode Impulse is a trademarked name for a cordless nail gun manufactured by Paslode. Cordless nail guns do not need an air compressor. Instead, they use what Paslode calls a "fuel cell", but is actually a very small two stroke engine which fires one ignition stroke for each nail driven, and reloads itself from a small metal can filled with pressurized flammable gas (a mixture of propene and but-1-ene). It has a battery pack and a high-voltage power supply, to deliver a spark. The combustion chamber is divided in two parts and is normally open to the atmosphere. When the contact tip is pushed onto a piece of work, the lower piston chamber (which also serves as the piston bore) is pushed into the upper part, sealing it. Simultaneously, a metered amount of fuel is squirted into the chamber from the fuel container. When the trigger is pulled, a spark plug ignites the fuel charge, pushing the piston and connected drive pin to the bottom of the chamber and driving a nail. A small amount of combustion gas is briefly stored in a side chamber and is used to push the piston back into the ready position after the nail is driven. After the contact tip is lifted from the work, the combustion chamber opens and a small fan blows away the exhaust gas. Pressing the contact tip to the work without pulling the trigger uses one of the metered fuel charges.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.