Path-vector routing protocol

Article summary

A path-vector routing protocol is a network routing protocol which maintains the path information that gets updated dynamically. Updates that have looped through the network and returned to the same node are easily detected and discarded. This algorithm is sometimes used in Bellman–Ford routing algorithms to avoid "Count to Infinity" problems. It is different from the distance vector routing and link state routing. Each entry in the routing table contains the destination network, the next router and the path to reach the destination. Border Gateway Protocol (BGP) is an example of a path vector protocol. In BGP, the autonomous system boundary routers (ASBR) send path-vector messages to advertise the reachability of networks. Each router that receives a path vector message must verify the advertised path according to its policy. If the message complies with its policy, the router modifies its routing table and the message before sending the message to the next neighbor. It modifies the routing table to maintain the autonomous systems that are traversed in order to reach the destination system. It modifies the message to add its AS number and to replace the next router entry with its identification. Exterior Gateway Protocol (EGP) does not use path vectors.…

Key claims

No claims recorded.

Discussion questions

1. Summarise the article in your own words. Which single claim would you verify first, and why?
2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.