Lesson plan

PBIST

Programmable Built-In Self-Test (PBIST) is a memory DFT feature that incorporates all the required test systems into the chip itself. The test systems implemented on-chip are as follows: * algorithmic address generator * algorithmic data generator * program storage unit * loop control mechanisms PBIST was originally adopted by large memory chips that have high pin counts and operate at high frequencies, thereby exceeding the capability of production testers. The purpose of PBIST is to avoid developing and buying more sophisticated and very expensive testers. The interface between PBIST, which is internal to the processor, and the external tester environment is through the standard JTAG TAP controller pins. Algorithms and controls are fed into the chip through the TAP controller's Test Data Input (TDI) pin. The final result of the PBIST test is read out through the Test Data Output (TDO) pin. PBIST supports the entire algorithmic memory testing requirements imposed by the production testing methodology. In order to support all of the required test algorithms, PBIST must have the capability to store the required programs locally in the device. It must also be able to perform different address generation schemes, different test data pattern generation, looping schemes, and data comparisons.…

Back to article

Article summary

Programmable Built-In Self-Test (PBIST) is a memory DFT feature that incorporates all the required test systems into the chip itself. The test systems implemented on-chip are as follows: * algorithmic address generator * algorithmic data generator * program storage unit * loop control mechanisms PBIST was originally adopted by large memory chips that have high pin counts and operate at high frequencies, thereby exceeding the capability of production testers. The purpose of PBIST is to avoid developing and buying more sophisticated and very expensive testers. The interface between PBIST, which is internal to the processor, and the external tester environment is through the standard JTAG TAP controller pins. Algorithms and controls are fed into the chip through the TAP controller's Test Data Input (TDI) pin. The final result of the PBIST test is read out through the Test Data Output (TDO) pin. PBIST supports the entire algorithmic memory testing requirements imposed by the production testing methodology. In order to support all of the required test algorithms, PBIST must have the capability to store the required programs locally in the device. It must also be able to perform different address generation schemes, different test data pattern generation, looping schemes, and data comparisons.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.