PCI Express

Uses your system voice; voice and rate in settings.

Snapshot

≈ 26 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

, from top to bottom: PCI Express (Peripheral Component Interconnect Express), officially abbreviated as PCIe, is a high-speed standard used to connect hardware components inside computers. It is designed to replace older expansion bus standards such as PCI, PCI-X and AGP.

Developed and maintained by the PCI-SIG (PCI Special Interest Group), PCIe is commonly used to connect graphics cards, sound cards, Wi-Fi and Ethernet adapters, and storage devices such as solid-state drives and hard disk drives. Compared to earlier standards, PCIe supports faster data transfer, uses fewer pins, takes up less space, and allows devices to be added or removed while the computer is running (hot swapping).

It also includes better error detection and supports newer features like I/O virtualization for advanced computing needs. PCIe connections are made through lanes, which are pairs of conductors that send and receive data. Devices can use one or more lanes depending on how much data they need to transfer.

PCIe technology is also used in laptop expansion cards (like ExpressCard) and in storage connectors such as M.2, U.2, and SATA Express.

, from top to bottom: PCI Express (Peripheral Component Interconnect Express), officially abbreviated as PCIe, is a high-speed standard used to connect hardware components inside computers. It is designed to replace older expansion bus standards such as PCI, PCI-X and AGP.

Developed and maintained by the PCI-SIG (PCI Special Interest Group), PCIe is commonly used to connect graphics cards, sound cards, Wi-Fi and Ethernet adapters, and storage devices such as solid-state drives and hard disk drives. Compared to earlier standards, PCIe supports faster data transfer, uses fewer pins, takes up less space, and allows devices to be added or removed while the computer is running (hot swapping).

It also includes better error detection and supports newer features like I/O virtualization for advanced computing needs. PCIe connections are made through lanes, which are pairs of conductors that send and receive data. Devices can use one or more lanes depending on how much data they need to transfer.

PCIe technology is also used in laptop expansion cards (like ExpressCard) and in storage connectors such as M.2, U.2, and SATA Express.

Interconnect

channels using two differential signaling pairs. PCI Express devices communicate via a logical connection called an interconnect or link. A link is a point-to-point communication channel between two PCI Express ports allowing both of them to send and receive ordinary PCI requests (configuration, I/O or memory read/write) and interrupts (INTx, MSI or MSI-X).

At the physical level, a link is composed of one or more lanes. Low-speed peripherals (such as an 802.11 Wi-Fi card) use a single-lane (x1) link, while a graphics adapter typically uses a much wider and therefore faster 16-lane (x16) link.

Lane

A lane is composed of two differential signaling pairs, with one pair for receiving data and the other for transmitting. Thus, each lane is composed of four wires or signal traces. Conceptually, each lane is used as a full-duplex byte stream, transporting data packets in eight-bit "byte" format simultaneously in both directions between endpoints of a link.

Physical PCI Express links may contain 1, 4, 8 or 16 lanes. Lane counts are written with an "x" prefix (for example, "x8" represents an eight-lane card or slot), with x16 being the largest size in common use. Lane sizes are also referred to via the terms "width" or "by" e.g., an eight-lane slot could be referred to as a "by 8" or as "8 lanes wide."

For mechanical card sizes, see below.

Switch

A PCIe switch is like a network switch, except that it works with PCIe connections. In the tree topology is one upstream port where it connects to a higher-level device (another switch or directly a PCIe bus) and a number of downstream ports. The switch is responsible for receiving a packet from one port and forwarding it to an appropriate, different port.

By doing packet-switching, the bandwidth is effectively shared across multiple downstream ports (compared to static lane bifurcation). A more advanced multi-host topology contains multiple upstream ports.

PCI Express add-in card

A PCI Express add-in card fits into a slot of its physical size or larger (with x16 as the largest used), but may not fit into a smaller PCI Express slot; for example, a x16 card may not fit into a x4 or x8 slot. Some slots use open-ended sockets to permit physically longer cards and negotiate the best available electrical and logical connection.

The number of lanes actually connected to a slot may also be fewer than the number supported by the physical slot size. An example is a x16 slot that runs at x4, which accepts any x1, x2, x4, x8 or x16 card, but provides only four lanes. Its specification may read as "x16 (x4 mode)" or "x16 (x4 signal)", while "mechanical @ electrical" notation (e.g. "x16 @ x4") is also common.

The advantage is that such slots can accommodate a larger range of PCI Express cards without requiring motherboard hardware to support the full transfer rate. Standard mechanical sizes are x1, x4, x8, and x16.

Cards using a number of lanes other than the standard mechanical sizes need to physically fit the next larger mechanical size (e.g. an x2 card uses the x4 size, or an x12 card uses the x16 size). The cards themselves are designed and manufactured in various sizes.

For example, solid-state drives (SSDs) that come in the form of PCI Express cards often use HHHL (half height, half length) and FHHL (full height, half length) to describe the physical dimensions of the card. The concept of "full" and "half" heights and lengths are inherited from Conventional PCI. The length levels beside full are not a PCIe standard, but only a manufacturer agreement.

Half length provides sufficient space for a x16 connector. Below that narrower data connectors need to be used. These dimensions can be freely mixed and matched, but larger dimensions tend to co-occur.

There is a fixed distance of between the connector's key notch (middle ridge diving data and power) and the end of the card, which may be covered by an end plate with a screw-hole for installing onto the computer case. This fixed length ensures that cards do not protrude out of the chassis. The slot spacing is exactly on ATX motherboards.

For further specifications of the slot, see #Physical layer below.

PCI Express Mini Card

PCI Express Mini Card and its connector PCI Express Mini Card (also known as Mini PCI Express, Mini PCIe, Mini PCI-E, mPCIe, and PEM), based on PCI Express, is a replacement for the Mini PCI form factor. It is developed by the PCI-SIG. The host device supports both PCI Express and USB 2.0 connectivity, and each card may use either standard.

Most laptop computers built between 2005 and 2013 use Mini PCI Express for expansion cards; however, , many vendors have moved toward using the newer M.2 form factor for this purpose. Due to different dimensions, PCI Express Mini Cards are not physically compatible with standard full-size PCI Express slots; however, passive adapters exist that let them be used in full-size slots.

Mini-SATA (mSATA) variant

Atlas 240GB mSATA Solid-state drive Despite sharing the Mini PCI Express form factor, an mSATA slot is not necessarily electrically compatible with Mini PCI Express. For this reason, only certain notebooks are compatible with mSATA drives. Most compatible systems are based on Intel's Sandy Bridge processor architecture, using the Huron River platform.

Notebooks such as Lenovo's ThinkPad T, W and X series, released in March–April 20111, have support for an mSATA SSD card in their WWAN card slot. The ThinkPad Edge E220s/E420s, and the Lenovo IdeaPad Y460/Y560/Y570/Y580 also support mSATA. On the contrary, the L-series among others can only support M.2 cards using the PCIe standard in the WWAN slot.

Some notebooks (notably the Asus Eee PC, the Apple MacBook Air, and the Dell mini9 and mini10) use a variant of the PCI Express Mini Card as an SSD. This variant uses the reserved and several non-reserved pins to implement SATA and IDE interface passthrough, keeping only USB, ground lines, and sometimes the core PCIe x1 bus intact.

This makes the "miniPCIe" flash and solid-state drives sold for netbooks largely incompatible with true PCI Express Mini implementations. Also, the typical Asus miniPCIe SSD is 71 mm long, causing the Dell 51 mm model to often be (incorrectly) referred to as half length. A true 51 mm Mini PCIe SSD was announced in 2009, with two stacked PCB layers that allow for higher storage capacity.

The announced design preserves the PCIe interface, making it compatible with the standard mini PCIe slot. No working product has yet been developed. Intel has numerous desktop boards with the PCIe x1 Mini-Card slot that typically do not support mSATA SSD.

A list of desktop boards that natively support mSATA in the PCIe x1 Mini-Card slot (typically multiplexed with a SATA port) is provided on the Intel Support site.

PCI Express External Cabling

PCI Express External Cabling (also known as External PCI Express, Cabled PCI Express, or ePCIe) specifications were released by the PCI-SIG in February 20071. Standard cables and connectors have been defined for x1, x4, x8, and x16 link widths, with a transfer rate of 250 MB/s per lane. The PCI-SIG also expects the norm to evolve to reach 500 MB/s, as in PCI Express 2.0.

An example of the uses of Cabled PCI Express is a metal enclosure, containing a number of PCIe slots and PCIe-to-ePCIe adapter circuitry. This device would not be possible had it not been for the ePCIe specification.

OCuLink (standing for "optical-copper link", as Cu is the chemical symbol for copper) is an extension for the "cable version of PCI Express". Version 1.0 of OCuLink, released in Oct 20151, supports up to 4 PCIe 3.0 lanes (3.9 GB/s) over copper cabling; a fiber optic version may appear in the future.

The most recent version of OCuLink, OCuLink-2, supports 8 GB/s or 16 GB/s (PCIe 4.0 x4 or x8) while the maximum bandwidth of a USB (USB4 Gen 4) or Thunderbolt 5 connection is 10 GB/s. OCulink is principally intended for PCIe (or SATA breakout) interconnections in servers, but also finds limited adoption on laptops for the connection of external GPU boxes.

PCI Express 1.0a

In 2003, PCI-SIG introduced PCIe 1.0a, with a per-lane data rate of 0.25 gigabytes per second (GB/s) and a transfer rate of 2.5 gigatransfers per second (GT/s). Transfer rate is expressed in transfers per second instead of bits per second because the number of transfers includes the overhead bits, which do not provide additional throughput; PCIe 1.x uses an 8b/10b encoding scheme, resulting in a 20% (= 2/10) overhead on the raw channel bandwidth. So in the PCIe terminology, transfer rate refers to the encoded bit rate: 2.5 GT/s is 2.5 Gbit/s on the encoded serial link.

This corresponds to 2.0 Gbit/s of pre-coded data or 0.25 GB/s, which is referred to as throughput in PCIe.

PCI Express 1.1

In 2005, PCI-SIG introduced PCIe 1.1. This updated specification includes clarifications and several improvements, but is fully compatible with PCI Express 1.0a. No changes were made to the data rate.

PCI Express 2.0

PCI-SIG announced the availability of the PCI Express Base 2.0 specification on 15 January 2007. The PCIe 2.0 standard doubles the transfer rate compared with PCIe 1.0 to 5 GT/s and the per-lane throughput rises from 250 MB/s to 500 MB/s. Consequently, a 16-lane PCIe connector (x16) can support an aggregate throughput of up to 8 GB/s. PCIe 2.0 motherboard slots are fully backward compatible with PCIe v1.x cards.

PCIe 2.0 cards are also generally backward compatible with PCIe 1.x motherboards, using the available bandwidth of PCI Express 1.1. Overall, graphic cards or motherboards designed for v2.0 work, with the other being v1.1 or v1.0a. The PCI-SIG also said that PCIe 2.0 features improvements to the point-to-point data transfer protocol and its software architecture.

Intel's first PCIe 2.0 capable chipset was the X38 and boards began to ship from various vendors (Abit, Asus, Gigabyte) as of 21 October 2007. AMD started supporting PCIe 2.0 with its AMD 700 chipset series and nVidia started with the MCP72.

All of Intel's prior chipsets, including the Intel P35 chipset, supported PCIe 1.1 or 1.0a. Like 1.x, PCIe 2.0 uses an 8b/10b encoding scheme, therefore delivering, per-lane, an effective 4 Gbit/s max. transfer rate from its 5 GT/s raw data rate.

PCI Express 2.1

PCI Express 2.1 (with its specification dated 4 March 2009) supports a large proportion of the management, support, and troubleshooting systems planned for full implementation in PCI Express 3.0. However, the speed is the same as PCI Express 2.0.

The increase in power from the slot breaks backward compatibility between PCI Express 2.1 cards and some older motherboards with 1.0/1.0a, but most motherboards with PCI Express 1.1 connectors are provided with a BIOS update by their manufacturers through utilities to support backward compatibility of cards with PCIe 2.1.

PCI Express 3.0

PCI Express 3.0 Base specification revision 3.0 was made available in November 2010, after multiple delays. In August 2007, PCI-SIG announced that PCI Express 3.0 would carry a bit rate of 8 gigatransfers per second (GT/s), and that it would be backward compatible with existing PCI Express implementations.

At that time, it was also announced that the final specification for PCI Express 3.0 would be delayed until Q2 2010. New features for the PCI Express 3.0 specification included a number of optimizations for enhanced signaling and data integrity, including transmitter and receiver equalization, PLL improvements, clock data recovery, and channel enhancements of currently supported topologies.

Following a six-month technical analysis of the feasibility of scaling the PCI Express interconnect bandwidth, PCI-SIG's analysis found that 8 gigatransfers per second could be manufactured in mainstream silicon process technology, and deployed with existing low-cost materials and infrastructure, while maintaining full compatibility (with negligible impact) with the PCI Express protocol stack. PCI Express 3.0 upgraded the line encoding scheme to 128b/130b from the previous 8b/10b encoding, reducing the bandwidth overhead from 20% of PCI Express 2.0 to approximately 1.54% (= 2/130).

PCI Express 3.0's 8 GT/s bit rate effectively delivers 985 MB/s per lane, nearly doubling the lane bandwidth relative to PCI Express 2.0. On 18 November 2010, the PCI-SIG officially published the finalized PCI Express 3.0 specification to its members to build devices based on this new version of PCI Express.

PCI Express 3.1

In September 2013, PCI Express 3.1 specification was announced for release in late 2013 or early 20141, consolidating various improvements to the published PCI Express 3.0 specification in three areas: power management, performance and functionality. It was released in November 2014.

PCI Express 4.0

On 29 November 2011, PCI-SIG preliminarily announced PCI Express 4.0, providing a 16 GT/s bit rate that doubles the bandwidth provided by PCI Express 3.0 to 31.5 GB/s in each direction for a 16-lane configuration, while maintaining backward and forward compatibility in both software support and used mechanical interface. PCI Express 4.0 specs also bring OCuLink-2, an alternative to Thunderbolt.

OCuLink version 2 has up to 16 GT/s (16 GB/s total for x8 lanes), while the maximum bandwidth of a Thunderbolt 3 link is 5 GB/s. At the 2016 PCI-SIG Developers Conference, Cadence, PLDA, and Synopsys demonstrated their development of PCIe 4.0 physical layer, controller, switch, and other IP blocks. Mellanox Technologies announced the first 100 Gbit/s network adapter with PCIe 4.0 on 15 June 2016, and the first 200 Gbit/s network adapter with PCIe 4.0 on 10 November 2016.

In August 2016, Synopsys presented a test setup with FPGA clocking a lane to PCIe 4.0 speeds at the Intel Developer Forum. Their IP has been licensed to several firms planning to present their chips and products at the end of 2016. On the IEEE Hot Chips Symposium in August 2016 IBM announced the first CPU with PCIe 4.0 support, POWER9.

PCI-SIG officially announced the release of the final PCI Express 4.0 specification on 8 June 2017. The spec includes improvements in flexibility, scalability, and lower-power. On 5 December 2017 IBM announced the first system with PCIe 4.0 slots, Power AC922.

NETINT Technologies introduced the first NVMe SSD based on PCIe 4.0 on 17 July 2018, ahead of Flash Memory Summit 2018 AMD announced on 9 January 2019 its upcoming Zen 2-based processors and X570 chipset would support PCIe 4.0. AMD had hoped to enable partial support for older chipsets, but instability caused by motherboard traces not conforming to PCIe 4.0 specifications made that impossible.

Intel released their first mobile CPUs with PCI Express 4.0 support in mid-20201, as a part of the Tiger Lake microarchitecture.

PCI Express 5.0

In June 2017, PCI-SIG announced the PCI Express 5.0 preliminary specification. Bandwidth was expected to increase to 32 GT/s, yielding 63 GB/s in each direction in a 16-lane configuration. The draft spec was expected to be standardized in 2019.

Initially, was also considered for technical feasibility. On 7 June 2017 at PCI-SIG DevCon, Synopsys recorded the first demonstration of PCI Express 5.0 at 32 GT/s. On 31 May 2018, PLDA announced the availability of their XpressRICH5 PCIe 5.0 Controller IP based on draft 0.7 of the PCIe 5.0 specification on the same day.

On 10 December 2018, the PCI SIG released version 0.9 of the PCIe 5.0 specification to its members, and on 17 January 2019, PCI SIG announced the version 0.9 had been ratified, with version 1.0 targeted for release in the first quarter of 2019. On 29 May 2019, PCI-SIG officially announced the release of the final PCI Express 5.0 specification.

The PCI Express 5.0 retained backward compatibility with previous versions of PCI Express specifications. On 20 November 2019, Jiangsu Huacun presented the first PCIe 5.0 Controller HC9001 in a 12 nm manufacturing process and production started in 2020.

On 17 August 2020, IBM announced the Power10 processor with PCIe 5.0 and up to 32 lanes per single-chip module (SCM) and up to 64 lanes per double-chip module (DCM). On 9 September 2021, IBM announced the Power E1080 Enterprise server with planned availability date 17 September.

It can have up to 16 Power10 SCMs with maximum of 32 slots per system which can act as PCIe 5.0 x8 or PCIe 4.0 x16. Alternatively they can be used as PCIe 5.0 x16 slots for optional optical CXP converter adapters connecting to external PCIe expansion drawers.

On 27 October 2021, Intel announced the 12th Gen Intel Core CPU family, the world's first consumer x86-64 processors with PCIe 5.0 (up to 16 lanes) connectivity. On 22 March 2022, Nvidia announced Nvidia Hopper GH100 GPU, the world's first PCIe 5.0 GPU.

On 23 May 2022, AMD announced its Zen 4 architecture with support for up to 24 lanes of PCIe 5.0 connectivity on consumer platforms and 128 lanes on server platforms.

PCI Express 6.0

On 18 June 2019, PCI-SIG announced the development of PCI Express 6.0 specification. Bandwidth is expected to increase to 64 GT/s, yielding 128 GB/s in each direction in a 16-lane configuration, with a target release date of 2021.

The new standard uses 4-level pulse-amplitude modulation (PAM-4) with a low-latency forward error correction (FEC) in place of non-return-to-zero (NRZ) modulation. Unlike previous PCI Express versions, forward error correction is used to increase data integrity and PAM-4 is used as line code so that two bits are transferred per transfer.

With 64 GT/s data transfer rate (raw bit rate), up to 121 GB/s in each direction is possible in x16 configuration. On 24 February 2020, the PCI Express 6.0 revision 0.5 specification (a "first draft" with all architectural aspects and requirements defined) was released.

On 5 November 2020, the PCI Express 6.0 revision 0.7 specification (a "complete draft" with electrical specifications validated via test chips) was released. On 6 October 2021, the PCI Express 6.0 revision 0.9 specification (a "final draft") was released. On 11 January 2022, PCI-SIG officially announced the release of the final PCI Express 6.0 specification.

The PCI Express 6.0 retained backward compatibility with previous versions of PCI Express specifications. PAM-4 coding results in a vastly higher bit error rate (BER) of 10 −6 (vs. 10 −12 previously), so in place of 128b/130b encoding, a 3-way interlaced forward error correction (FEC) is used in addition to cyclic redundancy check (CRC).

A fixed 256 byte Flow Control Unit (FLIT) block carries 242 bytes of data, which includes variable-sized transaction level packets (TLP) and data link layer payload (DLLP); remaining 14 bytes are reserved for 8-byte CRC and 6-byte FEC. 3-way Gray code is used in PAM-4/FLIT mode to reduce error rate; the interface does not switch to NRZ and 128/130b encoding even when retraining to lower data rates.

PCIe 6.0 hardware was not launched until August 2025, roughly three years after the release of the final specifications and shortly after the publication of the PCIe 7.0 specifications. The delay was described as unprecedented, with PCWorld noting that for many years PCIe 6.0 existed "solely on paper".

PCI Express 7.0

On 21 June 2022, PCI-SIG announced the development of PCI Express 7.0 specification. It will deliver 128 GT/s raw bit rate and up to 242 GB/s per direction in x16 configuration, using the same PAM4 signaling as version 6.0.

Doubling of the data rate will be achieved by fine-tuning channel parameters to decrease signal losses and improve power efficiency, but signal integrity is expected to be a challenge. The specification is expected to be finalized in 2025. On 3 April 2024, the PCI Express 7.0 revision 0.5 specification (a "first draft") was released.

On 17 January 2025, PCI-SIG announced the release of PCIe 7.0 specification version 0.7 (a "complete draft"). On 19 March 2025, PCI-SIG announced the release of PCIe 7.0 specification version 0.9 (a "final draft"); planned final release is still in 2025.

The following main points were formulated as objectives of the new standard: Delivering 128 GT/s raw bit rate and up to 512 GB/s bi-directionally via x16 configuration Utilizing PAM4 (Pulse Amplitude Modulation with 4 levels) signaling Focusing on the channel parameters and reach Improving power efficiency Continuing to deliver the low-latency and high-reliability targets Maintaining backwards compatibility with all previous generations of PCIe technology On 11 June 2025, PCI-SIG officially announced the release of the final PCI Express 7.0 specification. At its release, PCI-SIG commented that it did not see the PCIe 7.0 coming to the PC market for some time.

Instead the interface is initially targeted at cloud computing, 800-gigabit Ethernet, and artificial intelligence applications.

Extensions and future directions

Some vendors offer PCIe over fiber products, with active optical cables (AOC) for PCIe switching at increased distance in PCIe expansion drawers, or in specific cases where transparent PCIe bridging is preferable to using a more mainstream standard (such as InfiniBand or Ethernet) that may require additional software to support it. Thunderbolt was co-developed by Intel and Apple as a general-purpose high speed interface combining a logical PCIe link with DisplayPort and was originally intended as an all-fiber interface, but due to early difficulties in creating a consumer-friendly fiber interconnect, nearly all implementations are copper systems.

A notable exception, the Sony VAIO Z VPC-Z2, uses a nonstandard USB port with an optical component to connect to an outboard PCIe display adapter. Apple has been the primary driver of Thunderbolt adoption through 2011, though several other vendors have announced new products and systems featuring Thunderbolt. Thunderbolt 3 forms the basis of the USB4 standard.

Mobile PCIe specification (abbreviated to M-PCIe) allows PCI Express architecture to operate over the MIPI Alliance's M-PHY physical layer technology. Building on top of already existing widespread adoption of M-PHY and its low-power design, Mobile PCIe lets mobile devices use PCI Express. iPhone is one example that utilizing integrated NVMe storage with M-PCIe.

Physical layer

The PCIe Physical Layer (PHY, PCIEPHY, PCI Express PHY, or PCIe PHY) specification is divided into two sub-layers, corresponding to electrical and logical specifications. The logical sublayer is sometimes further divided into a MAC sublayer and a PCS, although this division is not formally part of the PCIe specification.

A specification published by Intel, the PHY Interface for PCI Express (PIPE), defines the MAC/PCS functional partitioning and the interface between these two sub-layers. The PIPE specification also identifies the physical media attachment (PMA) layer, which includes the SerDes (serializer/deserializer) and other analog circuitry; however, since SerDes implementations vary greatly among ASIC vendors, PIPE does not specify an interface between the PCS and PMA.

At the electrical level, each lane consists of two unidirectional differential pairs operating at 2.5, 5, 8, 16 or 32 Gbit/s, depending on the negotiated capabilities. Transmit and receive are separate differential pairs, for a total of four data wires per lane. A connection between any two PCIe devices is known as a link, and is built up from a collection of one or more lanes.

All devices must minimally support single-lane (x1) link. Devices may optionally support wider links composed of up to 32 lanes.

This allows for very good compatibility in two ways: A PCIe card physically fits (and works correctly) in any slot that is at least as large as it is (e.g., a x1 sized card works in any sized slot); A slot of a large physical size (e.g., x16) can be wired electrically with fewer lanes (e.g., x1, x4, x8, or x12) as long as it provides the ground connections required by the larger physical slot size. In both cases, PCIe negotiates the highest mutually supported number of lanes.

Many graphics cards, motherboards and BIOS versions are verified to support x1, x4, x8 and x16 connectivity on the same connection. The width of a PCIe connector is 8.8 mm, while the height is 11.25 mm, and the length is variable.

The fixed section of the connector is 11.65 mm in length and contains two rows of 11 pins each (22 pins total), while the length of the other section is variable depending on the number of lanes. The pins are spaced at 1 mm intervals, and the thickness of the card going into the connector is 1.6 mm. PCIe 1.x is often quoted to support a data rate of 250 MB/s in each direction, per lane.

This figure is a calculation from the physical signaling rate (2.5 gigabaud) divided by the encoding overhead (10 bits per byte). This means a sixteen lane (x16) PCIe card would then be theoretically capable of 16×250 MB/s = 4 GB/s in each direction.

While this is correct in terms of data bytes, more meaningful calculations are based on the usable data payload rate, which depends on the profile of the traffic, which is a function of the high-level (software) application and intermediate protocol levels. Like other high data rate serial interconnect systems, PCIe has a protocol and processing overhead due to the additional transfer robustness (CRC and acknowledgements).

Long continuous unidirectional transfers (such as those typical in high-performance storage controllers) can approach >95% of PCIe's raw (lane) data rate. These transfers also benefit the most from increased number of lanes (x2, x4, etc.) But in more typical applications (such as a USB or Ethernet controller), the traffic profile is characterized as short data packets with frequent enforced acknowledgements.

This type of traffic reduces the efficiency of the link, due to overhead from packet parsing and forced interrupts (either in the device's host interface or the PC's CPU). Being a protocol for devices connected to the same printed circuit board, it does not require the same tolerance for transmission errors as a protocol for communication over longer distances, and thus, this loss of efficiency is not particular to PCIe.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378651517 under CC BY-SA 4.0; modifications have been made.

References

1 claim could not be tied to a specific sentence and is listed in the table below instead.

  1. ↩Wikipedia “PCI Express” revision 1378651517 · retrieved 2026-10-20 release date (×5) · confidence 0.95 revision URL