PDP-16

Uses your system voice; voice and rate in settings.

Snapshot

≈ 1 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The PDP-16 (Programmed Data Processor-16) was mainly intended for industrial control systems, but with more capability than DEC's PDP-14.

The PDP-16 (Programmed Data Processor-16) was mainly intended for industrial control systems, but with more capability than DEC's PDP-14.

Overview

The PDP-16 family of modules was introduced in 1971, and a pre-assembled system using these modules, the PDP-16/M was introduced in 1972.

The 16/M was nicknamed "Subminicomputer" and described as "a small microprogrammable computer." The general-purpose modules included: components to build a data path (registers, memories, ALUs, etc.) components to build a control structure (evoke an operation in the datapath, branch on a condition from the datapath, merge, etc.) other components necessary to complete a digital system (lights, switches, bus termination, backplane, etc.) The control structure was similar to a flow chart, which was very familiar to software developers.

As a result, the PDP-16 opened up digital system design to those with experience writing software but less hardware design experience than was traditionally required for this work. These modules were in the company's M series of Flip-Chip modules, which used TTL circuit technology. The economic strength of the PDP-16 was that it was effective "for designing unique (or relatively low production volume) systems."

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1352895830 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.