Lesson plan
Performance tuning
Performance tuning is the improvement of system performance. Typically in computer systems, the motivation for such activity is called a performance problem, which can be either real or anticipated. Most systems will respond to increased load with some degree of decreasing performance. A system's ability to accept higher load is called scalability, and modifying a system to handle a higher load is synonymous to performance tuning. Systematic tuning follows these steps: # Assess the problem and establish numeric values that categorize acceptable behavior. # Measure the performance of the system before modification. # Identify the part of the system that is critical for improving the performance. This is called the bottleneck. # Modify that part of the system to remove the bottleneck. # Measure the performance of the system after modification. # If the modification makes the performance better, adopt it. If the modification makes the performance worse, put it back the way it was. This is an instance of the measure-evaluate-improve-learn cycle from quality assurance. A performance problem may be identified by slow or unresponsive systems. This usually occurs because high system loading, causing some part of the system to reach a limit in its ability to respond. This limit within the system is referred to as a bottleneck. A handful of techniques are used to improve performance.…
Article summary
Performance tuning is the improvement of system performance. Typically in computer systems, the motivation for such activity is called a performance problem, which can be either real or anticipated. Most systems will respond to increased load with some degree of decreasing performance. A system's ability to accept higher load is called scalability, and modifying a system to handle a higher load is synonymous to performance tuning. Systematic tuning follows these steps: # Assess the problem and establish numeric values that categorize acceptable behavior. # Measure the performance of the system before modification. # Identify the part of the system that is critical for improving the performance. This is called the bottleneck. # Modify that part of the system to remove the bottleneck. # Measure the performance of the system after modification. # If the modification makes the performance better, adopt it. If the modification makes the performance worse, put it back the way it was. This is an instance of the measure-evaluate-improve-learn cycle from quality assurance. A performance problem may be identified by slow or unresponsive systems. This usually occurs because high system loading, causing some part of the system to reach a limit in its ability to respond. This limit within the system is referred to as a bottleneck. A handful of techniques are used to improve performance.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.