Phase diagram
A phase diagram in physical chemistry, engineering, mineralogy, and materials science is a type of chart used to show conditions (pressure, temperature, etc.) at which thermodynamically distinct phases (such as solid, liquid or gaseous…
≈ 5 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
A phase diagram in physical chemistry, engineering, mineralogy, and materials science is a type of chart used to show conditions (pressure, temperature, etc.) at which thermodynamically distinct phases (such as solid, liquid or gaseous states) occur and coexist at equilibrium. In the diagram on the right, the phase boundary between liquid and gas does not continue indefinitely.
Instead, it terminates at a point on the phase diagram called the critical point. This reflects the fact that, at extremely high temperatures and pressures, the liquid and gaseous phases become indistinguishable, in what is known as a supercritical fluid. In water, the critical point occurs at around T c = , p c = and ρ c = 356 kg/m 3 .
The existence of the liquid–gas critical point reveals a slight ambiguity in labelling the single phase regions. When going from the liquid to the gaseous phase, one usually crosses the phase boundary, but it is possible to choose a path that never crosses the boundary by going to the right of the critical point. Thus, the liquid and gaseous phases can blend continuously into each other.
The solid–liquid phase boundary can only end in a critical point if the solid and liquid phases have the same symmetry group. For most substances, the solid–liquid phase boundary (or fusion curve) in the phase diagram has a positive slope so that the melting point increases with pressure. This is true whenever the solid phase is denser than the liquid phase.
The greater the pressure on a given substance, the closer together the molecules of the substance are brought to each other, which increases the effect of the substance's intermolecular forces. Thus, the substance requires a higher temperature for its molecules to have enough energy to break out of the fixed pattern of the solid phase and enter the liquid phase.
A similar concept applies to liquid–gas phase changes. Water is an exception which has a solid-liquid boundary with negative slope so that the melting point decreases with pressure. This occurs because ice (solid water) is less dense than liquid water, as shown by the fact that ice floats on water.
At a molecular level, ice is less dense because it has a more extensive network of hydrogen bonding which requires a greater separation of water molecules. Other exceptions include antimony and bismuth.
At very high pressures above 50 GPa (500 000 atm), liquid nitrogen undergoes a liquid-liquid phase transition to a polymeric form and becomes denser than solid nitrogen at the same pressure. Under these conditions therefore, solid nitrogen also floats in its liquid.
The value of the slope dP/dT is given by the Clausius–Clapeyron equation for fusion (melting) \frac{\mathrm{d}P}{\mathrm{d}T} = \frac{\Delta H_\text{fus}}{T\,\Delta V_\text{fus}}, where ΔH fus is the heat of fusion which is always positive, and ΔV fus is the volume change for fusion. For most substances ΔV fus is positive so that the slope is positive.
However for water and other exceptions, ΔV fus is negative so that the slope is negative. File:Mollier enthalpy entropy chart for steam - US units.svg|enthalpy–entropy (h–s) diagram for steam File:Pressure-enthalpy chart for steam, in US units.svg|pressure–enthalpy (p–h) diagram for steam File:Temperature-entropy chart for steam, imperial units.svg|temperature–entropy (T–s) diagram for steam
Ternary phase diagrams
A system with three components is called a ternary system. At constant pressure the maximum number of independent variables is three – the temperature and two concentration values. For a representation of ternary equilibria a three-dimensional phase diagram is required.
Often such a diagram is drawn with the composition as a horizontal plane and the temperature on an axis perpendicular to this plane. To represent composition in a ternary system an equilateral triangle is used, called Gibbs triangle (see also Ternary plot).
File:Gibbs triangle-ternary plot.jpg|Gibbs triangle File:Space diagram of a three-component system.jpg|alt=Space diagram of a three-component system|Space phase diagram of a ternary system The temperature scale is plotted on the axis perpendicular to the composition triangle. Thus, the space model of a ternary phase diagram is a right-triangular prism.
The prism sides represent corresponding binary systems A-B, B-C, A-C. However, the most common methods to present phase equilibria in a ternary system are the following: 1) projections on the concentration triangle ABC of the liquidus, solidus, solvus surfaces; 2) isothermal sections; 3) vertical sections.
Crystals
Polymorphic and polyamorphic substances have multiple crystal or amorphous phases, which can be graphed in a similar fashion to solid, liquid, and gas phases. pressure–temperature phase diagram of water. The Roman numerals indicate various ice phases.
Mesophases
Some organic materials pass through intermediate states between solid and liquid; these states are called mesophases. Attention has been directed to mesophases because they enable display devices and have become commercially important through the so-called liquid-crystal technology. Phase diagrams are used to describe the occurrence of mesophases.
Binodal curves, tie-lines, lever rule and invariant points – How to read phase diagrams (Video by SciFox on TIB AV-Portal) The Alloy Phase Diagram International Commission (APDIC) Periodic table of phase diagrams of the elements (pdf poster)
Text derived from https://en.wikipedia.org/w/index.php?oldid=1350257784 under CC BY-SA 4.0; modifications have been made.