Phase margin

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In electronic amplifiers, the phase margin (PM) is the difference between the phase lag ( \mathrm{PM} = \varphi-(-180^\circ) . For example, if the amplifier's open-loop gain crosses 0 dB at a frequency where the phase lag is -135°, then the phase margin of this feedback system is -135° -(-180°) = 45°. See Bode plot#Gain margin and phase margin for more details.

In electronic amplifiers, the phase margin (PM) is the difference between the phase lag ( \mathrm{PM} = \varphi-(-180^\circ) . For example, if the amplifier's open-loop gain crosses 0 dB at a frequency where the phase lag is -135°, then the phase margin of this feedback system is -135° -(-180°) = 45°. See Bode plot#Gain margin and phase margin for more details. Typically the open-loop phase lag (relative to input, -135° - (-180°) = 45°. See Warwick or Stout for a detailed analysis of the techniques and results of compensation to ensure adequate phase margins. See also the article "Pole splitting". Often amplifiers are designed to achieve a typical phase margin of 60 degrees. If the typical phase margin is around 60 degrees then the minimum phase margin will typically be greater than 45 degrees. An amplifier with lower phase margin will ring for longer and an amplifier with more phase margin will take a longer time to rise to the voltage step's final level.

Footnotes

References

See also

Barkhausen stability criterion BIBO stability Nyquist stability criterion Routh–Hurwitz stability criterion Ringing artifacts Root locus method Bode plots & phase margin Step response & phase margin

Text derived from https://en.wikipedia.org/w/index.php?oldid=1354592888 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

5 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.