Phased array
≈ 9 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
of a phased array of 15 antenna elements spaced a quarter wavelength apart as the phase difference between adjacent antennas is swept between −120 to 120 degrees. The dark area is the beam or main lobe, while the light lines fanning out around it are sidelobes. In antenna theory, a phased array usually means an electronically scanned array, a computer-controlled array of antennas which creates a beam of radio waves that can be electronically steered to point in different directions without moving the antennas. In a phased array, the power from the transmitter is fed to the radiating elements through devices called phase shifters, controlled by a computer system, which can alter the phase or signal delay electronically, thus steering the beam of radio waves to a different direction. Since the size of an antenna array must extend many wavelengths to achieve the high gain needed for narrow beamwidth, phased arrays are mainly practical at the high frequency end of the radio spectrum, in the UHF and microwave bands, in which the operating wavelengths are conveniently small. Phased arrays were originally invented for use in military radar systems, to detect fast moving planes and missiles, but are now widely used and have spread to civilian applications such as 5G MIMO for cell phones.…
of a phased array of 15 antenna elements spaced a quarter wavelength apart as the phase difference between adjacent antennas is swept between −120 to 120 degrees. The dark area is the beam or main lobe, while the light lines fanning out around it are sidelobes. In antenna theory, a phased array usually means an electronically scanned array, a computer-controlled array of antennas which creates a beam of radio waves that can be electronically steered to point in different directions without moving the antennas. In a phased array, the power from the transmitter is fed to the radiating elements through devices called phase shifters, controlled by a computer system, which can alter the phase or signal delay electronically, thus steering the beam of radio waves to a different direction. Since the size of an antenna array must extend many wavelengths to achieve the high gain needed for narrow beamwidth, phased arrays are mainly practical at the high frequency end of the radio spectrum, in the UHF and microwave bands, in which the operating wavelengths are conveniently small. Phased arrays were originally invented for use in military radar systems, to detect fast moving planes and missiles, but are now widely used and have spread to civilian applications such as 5G MIMO for cell phones. The phased array principle is also used in acoustics in such applications as phased array ultrasonics, and in optics. The term "phased array" is also used to a lesser extent for unsteered array antennas in which the radiation pattern of the antenna array is fixed. For example, AM broadcast radio antennas consisting of multiple mast radiators are also called "phased arrays".
Description
(TX). The feed current for each element passes through a phase shifter (φ) controlled by a computer (C). The moving red lines show the wavefronts of the radio waves emitted by each element. The individual wavefronts are spherical, but they combine (superpose) in front of the antenna to create a plane wave. The phase shifters delay the radio waves progressively going up the line so each antenna emits its wavefront later than the one below it. This causes the resulting plane wave to be directed at an angle θ to the antenna's axis. By changing the phase shifts, the computer can instantly change the angle θ of the beam. Most phased arrays have two-dimensional arrays of antennas instead of the linear array shown here, and the beam can be steered in two dimensions. The velocity of the radio waves shown have been slowed down. A phased array is an electronically scanned array, a computer-controlled array of antennas which creates a beam of radio waves that can be electronically steered to point in different directions without moving the antennas. The general theory of an electromagnetic phased array also finds applications in ultrasonic and medical imaging application (phased array ultrasonics) and in optics (optical phased array). In a simple array antenna, the radio frequency current from the transmitter is fed to multiple individual antenna elements with the proper phase relationship so that the radio waves from the separate elements combine (superpose) to form beams. This can be configured to increase power radiated in desired directions and suppress radiation in undesired directions. In a phased array, the power from the transmitter is fed to the radiating elements through devices called phase shifters, controlled by a computer system. The computer can alter the phase or signal delay of each antenna element electronically, resulting in a beam of radio waves that can be dynamically "steered" to propagate in arbitrary directions. Phased arrays were originally conceived for use in military radar systems, to steer a beam of radio waves quickly across the sky to detect planes and missiles. These systems are now widely used and have spread to civilian applications such as 5G MIMO for cell phones. The phased array principle is also used in acoustics, and phased arrays of acoustic transducers are used in medical ultrasound imaging scanners (phased array ultrasonics), oil and gas prospecting (reflection seismology), and military sonar systems. The term "phased array" is also used to a lesser extent for non steerable array antennas in which the phase of the feed power and thus the radiation pattern of the antenna array is fixed. For example, AM broadcast radio antennas consisting of multiple mast radiators fed so as to create a specific radiation pattern are also called "phased arrays".
Formulation
The total directivity of a phased array will be a result of the gain of the individual array elements, and the directivity due their positioning in an array. This latter component is closely tied to, but not equal to, the array factor. In a (rectangular) planar phased array, of dimensions M\times N , with inter-element spacing d_{x} and d_{y} , respectively, the array factor can be calculated accordingly : AF=\sum_{n=1}^{N}I_{n1}\left[\sum_{m=1}^{M}I_{m1}\mathrm{e}^{j\left(m-1\right)\left(kd_{x}\sin\theta\cos\phi+\beta_{x}\right)}\right]\mathrm{e}^{j\left(n-1\right)\left(kd_{y}\sin\theta\sin\phi+\beta_{y}\right)} Here, \theta and \phi are the directions which we are taking the array factor in, in the coordinate frame depicted to the right. The factors \beta_{x} and \beta_{y} are the progressive phase shift that is used to steer the beam electronically. The factors I_{n1} and I_{m1} are the excitation coefficients of the individual elements. Beam steering is indicated in the same coordinate frame, however the direction of steering is indicated with \theta_{0} and \phi_{0} , which is used in calculation of progressive phase: \beta_{x}=-kd_{x}\sin\theta_{0}\cos\phi_{0} \beta_{y}=-kd_{y}\sin\theta_{0}\sin\phi_{0} In all above equations, the value k describes the wavenumber of the frequency used in transmission. These equations can be solved to predict the nulls, main lobe, and grating lobes of the array. Referring to the exponents in the array factor equation, we can say that major and grating lobes will occur at integer m,n=0,1,2,\dots solutions to the following equations: kd_{x}\sin\theta\cos\phi+\beta_{x}=\pm2m\pi kd_{y}\sin\theta\sin\phi+\beta_{y}=\pm2n\pi It is common in engineering to provide phased array AF values in decibels through AF_{dB}=10\log_{10}AF . Recalling the complex exponential in the array factor equation above, often, what is really meant by array factor is the magnitude of the summed phasor produced at the end of array factor calculation. With this, we can produce the following equation: AF_{dB}=10\log_{10}\left\|\sum_{n=1}^{N}I_{1n}\left[\sum_{m=1}^{M}I_{m1}\mathrm{e}^{j\left(m-1\right)\left(kd_{x}\sin\theta\cos\phi+\beta_{x}\right)}\right]\mathrm{e}^{j\left(n-1\right)\left(kd_{y}\sin\theta\sin\phi+\beta_{y}\right)}\right\| For the ease of visualization, we will analyze array factor given an input azimuth and elevation, which we will map to the array frame \theta and \phi through the following conversion: \theta=\arccos\left(\cos\left(\theta_{az}\right)\sin\left(\theta_{el}\right)\right) \phi=\arctan2\left(\sin\left(\theta_{el}\right),\sin\left(\theta_{az}\cos\left(\theta_{el}\right)\right)\right) This represents a coordinate frame whose \mathbf{x} axis is aligned with the array \mathbf{z} axis, and whose \mathbf{y} axis is aligned with the array \mathbf{x} axis. If we consider a 16\times16 phased array, this process provides the following values for AF_{dB} , when steering to bore-sight ( \theta_{0}=0^{\circ} , \phi_{0}=0^{\circ} ): These values have been clipped to have a minimum AF of -50 dB, however, in reality, null points in the array factor pattern will have values significantly smaller than this.
References
External links
Radar Research and Development - Phased Array Radar—National Severe Storms Laboratory Shipboard Phased Array Radars NASA Report: MMICs For Multiple Scanning Beam Antennas for Space Applications Principle of Phased Array 'Phased Array' microphone system of Tony Faulkner Principles of Phased Array systems - Tutorial 1
Text derived from https://en.wikipedia.org/w/index.php?oldid=1375729240 under CC BY-SA 4.0; modifications have been made.