Phonovoltaic
A phonovoltaic (pV) cell converts vibrational (phonons) energy into a direct current much like the photovoltaic effect in a photovoltaic (PV) cell converts light (photon) into power.
≈ 9 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
A phonovoltaic (pV) cell converts vibrational (phonons) energy into a direct current much like the photovoltaic effect in a photovoltaic (PV) cell converts light (photon) into power. That is, it uses a p-n junction to separate the electrons and holes generated as valence electrons absorb optical phonons more energetic than the band gap, and then collects them in the metallic contacts for use in a circuit.
The pV cell is an application of heat transfer physics and competes with other thermal energy harvesting devices like the thermoelectric generator. While the thermoelectric generator converts heat, a broad spectrum of phonon and electron energy, to electricity, the pV cell converts only a narrow band of phonon energy, i.e., only the most energetic optical phonon modes.
A narrow band of excited optical phonons has much less entropy than heat. Thus, the pV cell can exceed the thermoelectric efficiency.
However, exciting and harvesting the optical phonon poses a challenge. \begin{align} \eta_{\phi}=\Delta E_{e,g}/E_{p,\mathrm{O}}. \end{align} In addition this typical inefficiency, hot optical phonon populations tend to downconvert into multiple low-energy, acoustic phonon modes (whereas photons typically do not downconvert into low energy infrared waves). This efficiency ( \eta_{QE} ) is quantified by the tendency of a hot optical phonon to downconvert rather than generate an electron-hole pair, that is \begin{align} \eta_{QE}=\dot{\gamma}_{e-p}^*=\frac{\dot{\gamma}_{e-p}}{\dot{\gamma}_{e-p}+\dot{\gamma}_{p-p}}, \end{align} where \dot{\gamma}_{e-p} is the rate of generation and \dot{\gamma}_{p-p} is the rate of downconversion, i.e., the rate at which an optical phonon produces multiple low-energy, acoustic phonons.
This provides a second entropy flow reducing the efficiency of a pV cell. Finally, entropy is generated in both pV and PV cells due to the inefficient separation of the generated electrons and holes.
This efficiency ( \eta_{pn} ) is limited by the Carnot efficiency given by \begin{align} \eta_\mathrm{C}=1-\frac{T_{pV}}{T_{p,\mathrm{O}}}, \end{align} where T_\mathrm{pV} is the temperature of the pV cell and T_{p,\mathrm{O}} is the temperature of the optical phonon population, as dictated by the Bose–Einstein statistics. This efficiency is reduced the smaller the band gap is in comparison to the thermal energy ( k_\mathrm{B}T , where k_\mathrm{B} is the Boltzmann constant and T is the temperature).
Indeed, the p-n junction efficiency is approximately \begin{align} \eta_{pn} \simeq \eta_\mathrm{C} [1-0.75\exp(-0.1\Delta E_{e,g}/k_\mathrm{B} T_\mathrm{pV})]. \end{align} Thus, the overall efficiency ( \eta_\mathrm{pV} ) is \begin{align} \eta_\mathrm{pV} = \eta_\mathrm{C}\dot{\gamma}_{e-p}^*\frac{\Delta E_{e,g}}{E_{p,\mathrm{O}}} [1-0.75\exp(-0.1\Delta E_{e,g}/k_\mathrm{B} T_{pV})], \end{align} where the temperature independent terms become the material figure of merit ( Z_\mathrm{pV} ), \begin{align} Z_\mathrm{pV} = \dot{\gamma}_{e-p}^*\frac{\Delta E_{e,g}}{E_{p,\mathrm{O}}}. \end{align} If the band gap and optical phonon mode are resonant, and the optical phonon tends to generate electrons, the phonovoltaic cell can approach the Carnot limit as T_{pv}\rightarrow 0 . \langle f|\mathrm{H}_{e-p}'|i \rangle = M_{e-p} = (\frac{\hbar}{2\langle m \rangle \omega_{\kappa_p,\alpha}})^{1/2} \langle \boldsymbol{\kappa}_e+\boldsymbol{\kappa}_p,j | \frac{\partial \varphi}{\partial \mathbf{d}_{\boldsymbol{\kappa}_p,\alpha}} | \boldsymbol{\kappa}_e, i \rangle, \end{align} where \langle m \rangle is the average atomic mass, \omega_{\kappa_p,\alpha} and \mathbf{d}_{\boldsymbol{\kappa}_p,\alpha} are the frequency and atomic displacement due to a phonon with polarization \alpha and momentum \boldsymbol{\kappa}_p , and | \boldsymbol{\kappa}_e, i \rangle is the electron wavefunction for an electron with momentum \boldsymbol{\kappa}_e in band i. From Fermi's golden rule \begin{align} \dot{\gamma}_{e-p} = \frac{2\pi}{\hbar}|M_{e-p}|^2 \delta(E_{e,i,\mathbf{\kappa}_e}-E_{e,j,\mathbf{\kappa}_e+\mathbf{\kappa}_p}\pm \hbar \omega_{\mathbf{\kappa}_p,\alpha}) f_{e,i,\mathbf{\kappa}_e}(1-f_{e,i,\mathbf{\kappa}_e+\mathbf{\kappa}_p})(\frac{1}{2}\mp\frac{1}{2}+f_{p,\alpha,\mathbf{\kappa}_p}) \end{align} where E_{e,i,\mathbf{\kappa}_e} is the energy of an electron in band i and momentum \mathbf{\kappa}_e , f_{e,i,\mathbf{\kappa}_e} is the corresponding electron occupation, and f_{p,\alpha,\mathbf{\kappa}_p} is the phonon occupancy. \mathrm{H} &= \mathrm{H_o} + \frac{1}{2}\sum_{i,j}\sum_{\alpha,\beta}\frac{\partial^2\langle\varphi\rangle}{\partial d_{i\alpha}\partial d_{j\beta}}|_\mathrm{o}d_{i\alpha}d_{j\beta}+ \frac{1}{6}\sum_{i,j,k}\sum_{\alpha,\beta,\gamma}\frac{\partial^3\langle\varphi\rangle}{\partial d_{i\alpha}\partial d_{j\beta}\partial d_{k\gamma}}|_\mathrm{o} d_{i\alpha}d_{j\beta}d_{k\gamma} + \cdots\\ &=\mathrm{H_o} + \sum_{i,j}\sum_{\alpha,\beta}\Gamma_{ij,\alpha\beta}d_{i\alpha}d_{j\beta}+ \sum_{i,j,k}\sum_{\alpha,\beta,\gamma}\Psi_{ijk,\alpha\beta\gamma} d_{i\alpha}d_{j\beta}d_{k\gamma} + \cdots, \end{align} where \mathrm{H_o} is the ground-state Hamiltonian, the linear term vanishes (as the ground state is found by minimizing the energy in terms of the ionic position), and \Gamma_{ij,\alpha\beta} and \Psi_{ijk,\alpha\beta\gamma} are the second- and third-order force constants between atoms i, j, and k when moved in along coordinate \alpha , \beta , and \gamma . The second order term is primarily responsible for the phonon dispersion, while the anharmonic (third order and higher) terms are responsible for thermal expansion as well as the phonon up- (multiple low-energy optical phonons combine to form a high-energy phonon) and downconversion (a high-energy phonon splits into multiple low-energy phonons).
Typically, up- and down-conversion is dominated by the third-order interaction. Thus, the perturbation Hamiltonian used in Fermi's golden rule for phonon up- and downconversion is \begin{align} \mathrm{H}_{p-p}' &=\Psi_{\boldsymbol{\kappa}_p\boldsymbol{\kappa}_p'\boldsymbol{\kappa}_p,\alpha\alpha'\alpha} \\ \Psi_{\boldsymbol{\kappa}_p\boldsymbol{\kappa}_p'\boldsymbol{\kappa}_p,\alpha\alpha'\alpha} &= \sum_{ijk}\sum_{\alpha\beta\gamma} \Psi_{ijk,\alpha\beta\gamma} \frac{ \mathbf{s}_{i\alpha\boldsymbol{\kappa}_p} \mathbf{s}_{j\alpha'\boldsymbol{\kappa}_p'} \mathbf{s}_{k\alpha\boldsymbol{\kappa}_p}}{(\langle m \rangle \omega_{\kappa_p,\alpha})^{1/2}} \mathrm{exp}[i(\boldsymbol{\kappa}_p\cdot r_i+\boldsymbol{\kappa}_p'\cdot r_j + \boldsymbol{\kappa}_p\cdot r_k)], \end{align} where \mathbf{s}_{i\alpha\mathbf{\kappa_p}} is the direction of displacement for atom i due to the phonon.
The resulting downconversion rate, from Fermi's golden rule, is \dot{\gamma}_{p-p}=\frac{\hbar \pi}{16} |\Psi_{\boldsymbol{\kappa}_p\boldsymbol{\kappa}_p'\boldsymbol{\kappa}_p,\alpha\alpha'\alpha}|^2 \times\delta_{\kappa_p,\kappa_p'+\kappa_p}\delta(\omega_{\kappa_p,\alpha}-\omega_{\kappa_p',\alpha'}-\omega_{\kappa,\alpha})\times(f_p'+f_p+1), where two phonons are produced with polarization \alpha' and \alpha and momentum \mathbf{\kappa}_p' and \mathbf{\kappa}_p .
The suitability of graphene as a phonovoltaic material
As outlined above, an efficient pV cell requires a material with an optical phonon mode more energetic than the bandgap, which in turn is much more energetic than the thermal energy at the intended operating temperature (E_{p,\mathrm{O}}\simeq\Delta E_{e,g}\gg k_\mathrm{B} T_\mathrm{pV}) . Furthermore, the pV cell requires a material wherein a hot optical phonon prefers to produce an electron rather than multiple low energy acoustic phonons ( \dot{\gamma}_{e-p}^*\rightarrow 1 ).
Very few materials offer this combination of properties. Indeed, the vast majority of crystals have optical phonon energies limited to below 50 meV, and those with more energetic optical phonons tend to have much more energetic band gaps. In general, a material with a first-row element (periodic table) is required to have a highly energetic optical phonon.
However, the high electronegativity of a first-row elements tends to create a very large band gap, as in diamond and the boron nitride allotropes. Graphene is one of the few materials which diverges from this trend, with no bandgap and an exceptionally energetic optical phonon mode near 200 meV.
Thus, graphene has been the initial target for development of a phonovoltaic material through the opening and tuning of its bandgap. Opening and tuning the bandgap of graphene has received substantial attention, and numerous strategies have been suggested and investigated. These include the use of uniaxial strain, electric fields, and chemical doping and functionalization.
In general, these mechanisms work by either changing the symmetry of graphene (both Carbon atoms in the unit cell are identical) or hybridization ( sp^2 ). In the first phonovoltaic material investigations, it has been suggested that the latter technique destroys the electron-phonon coupling while the former preserves it.
In particular, these investigations predict that hydrogenating graphene, to produce graphane, reduces the electron-phonon coupling so substantially that the material figure of merit vanishes; and that doping graphene with boron nitride maintains the strong electron-phonon coupling in graphene, such that its figure of merit is predicted to reach 0.65 and enable heat harvesting with twice the efficiency of a typical thermoelectric generator.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1376675014 under CC BY-SA 4.0; modifications have been made.