Phosphaethynolate
≈ 8 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
The phosphaethynolate anion, also referred to as PCO, is the phosphorus-containing analogue of the cyanate anion with the chemical formula or . The anion has a linear geometry and is commonly isolated as a salt. When used as a ligand, the phosphaethynolate anion is ambidentate in nature meaning it forms complexes by coordinating via either the phosphorus or oxygen atoms. This versatile character of the anion has allowed it to be incorporated into many transition metal and actinide complexes but now the focus of the research around phosphaethynolate has turned to utilising the anion as a synthetic building block to organophosphanes.
The phosphaethynolate anion, also referred to as PCO, is the phosphorus-containing analogue of the cyanate anion with the chemical formula or . The anion has a linear geometry and is commonly isolated as a salt. When used as a ligand, the phosphaethynolate anion is ambidentate in nature meaning it forms complexes by coordinating via either the phosphorus or oxygen atoms. This versatile character of the anion has allowed it to be incorporated into many transition metal and actinide complexes but now the focus of the research around phosphaethynolate has turned to utilising the anion as a synthetic building block to organophosphanes.
Attack by oxygen
Coordination via the oxygen atom is favoured by hard, highly electropositive centres. This is due to the fact that oxygen is a more electronegative atom and thus prefers to bind via more ionic interactions. Examples of this type of coordination were presented in the work of Arnold et al. from 20151. The group found that actinide complexes of PCO involving uranium and thorium both coordinated through the oxygen. This is the result of the contracted nature of the actinide orbitals which makes the metal centres more 'core-like' thus favouring ionic interactions.
Attack by phosphorus
On the other hand, softer, more polarisable centres prefer to coordinate in a more covalent manner through the phosphorus atom. Examples of this include complexes accommodating a neutral or sparsely charged transition metal centre. The first example of this nature of PCO binding was published by Grutzmacher and co-workers in 20121. The group's studies used a Re(I) complex and the analysis of its bonding parameters and electronic structure showed that the phosphaethynolate anion coordinated in a bent fashion. This suggested the Re(I) – P bond possessed a highly covalent character thus the complex would be best described as a metallaphosphaketene. It wasn't until four years later that a second example of this coordination nature of PCO was identified. This time it came in the form of a W(0) pentacarbonyl complex produced by the Goicoechea group. functional and aug-cc-pVTZ basis set using Molden and GAMESS. From left to right, the atoms are P, C and O.
Rearrangement of coordination character
There is one particular reaction studied by Grutzmacher et al. that exhibits the rearrangement of coordination character of PCO. Initially when reacting the anion with triorganyl silicon compounds, it binds via the oxygen forming the kinetic oxyphosphaalkyne product. The thermodynamic silyl phosphaketene product is generated when the kinetic product rearranges to allow PCO to coordinate through phosphorus. The formation of the kinetic product is charged controlled and thus explains why it is formed by oxygen coordination. The oxygen atom favours a larger degree of ionic interactions as a result of its greater electronegativity. Contrastingly, the thermodynamic product of the reaction is generated under orbital control. This comes in the form of phosphorus coordination as the largest contribution in the HOMO of the anion resides on the phosphorus atom; this is clearly visible in Figure 3.
Phosphorus transfer agents
In these types of reactions, CO is released as the phosphaethynolate anion acts as either a mild nucleophilic source of phosphorus or a Brønsted base. Examples of these types of reactions involving PCO include work conducted by Grutzmacher and Goicoechea. In 2014, Grutzmacher et al. reported that an imidazolium salt would react with the phosphaethynolate anion to produce a phosphinidine carbene adduct. Computational mechanistic studies were conducted on this reaction using density functional theory at the B3LYP/6-31+G* level. The results of these investigations suggested that the lowest energy and therefore most likely pathway involves PCO acting as a Brønsted base initially deprotonating the acidic imidazolium cation to generate the intermediate phosphaketene, HPCO. The highly unstable protonated PCO remains hydrogen bonded to the newly produced N-heterocylic carbene prior to rearrangement and formation of the observed product. In this case, PCO does not act as a mild nucleophile due to the augmented stability of the starting imidazolium cation. On the other hand, in the work published by Goicoechea and co-workers in 2015, the phosphaethynolate anion can be seen to act as a source of nucleophilic phosphide ( ). The anion was seen to add across the double bond of cyclotrisilene thus introducing a phosphorus vertex into its scaffold (after undergoing decarbonylation).
Cycloaddition Reagents
After synthesising the potassium salt of the phosphaethynolate anion in 2013, Goicoechea et al. began to look into the potential of PCO towards cycloadditions. They found that the anion could react in a [2+2] fashion with a diphenyl ketene to produce the first isolatable example of a four-membered monoanionic phosphorus containing heterocycle. They employed the same method to test other unsaturated substrates such as carbodiimides and found that the likelihood of cyclisation heavily relies on the nature of the substituents on the unsaturated substrate. Cycloaddition reactions involving the phosphaethynolate anion have also been shown by Grutzmacher and co-workers to be a viable synthetic route to other heterocycles. One simple example is the reaction between the NaPCO and an α-pyrone. This reaction yields the sodium phosphinin-2-olate salt which is stable to both air and moisture.
Synthetic building blocks
A large part of the research involving PCO is now looking into utilising the anion as a synthetic building block to derive phosphorus containing analogues of small molecules. The first major breakthrough in this area came from Goicoechea et al. in 2013; they published the reaction between the PCO anion and ammonium salts which yielded the phosphorus containing analogue of urea in which phosphorus replaces a nitrogen atom. The group predict that this heavier congener could have applications in new materials, anion sensing and coordination chemistry. Goicoechea and co-workers were also able to isolate the heavily sought after phosphorus containing analogue of isocyanic acid, HPCO, in 2017. This molecule is thought to be a crucial intermediate in a lot of reactions involving PCO (including P-transfer to an imidazolium cation). Moreover, the most recent addition to this class of small molecules is the phosphorus containing analogue of N,N-dimethylformamide. This work in which the phosphorus again replaces a nitrogen atom was published in 20181 by Stephan and co-workers. Generating acylphosphines in this manner is considered a much milder route than other current strategies that require multi-step syntheses involving toxic, volatile and pyrophoric reagents.
Varying E
As 'E' is varied by descending group 15, there is a clear shift in the weights of the resonance structures towards the phosphaketene analogue . This reflects the decrease in effective orbital overlap between E and C which in turn disfavours multiple bond formation. This increasing tendency to form double and not triple E-C bonds is also reflected in calculated E-C bond lengths . The data from Table 1 is evidence of E-C bond elongation which correlates with the change from triple to double bond. In addition, NBO analysis highlights that the greatest electron delocalisation within the anions stems from the donation of an oxygen lone pair into the E−C π antibonding orbital. The energy value associated with this donation is seen to increase down the group . This explains the increasing resonance weight towards the ketene like isomer as populating antibonding orbitals usually suggests the breaking of a bond. The shift towards the ketene isomer will also cause an increase in charge density on the elemental 'E' atom; this makes the elemental atom an increasing source of nucleophilicity . analysis from Molden and GAMESS. From left to right, the atoms are P, C and O.
Varying X
analysis from Molden and GAMESS. From top to bottom, the atoms are O, C and P. analysis from Molden and GAMESS. From top to bottom, the atoms are S, C and P. The simplest analogue that can be formed as 'X' is varied is . This anion was first isolated by Becker et al. by reacting the phosphaethynolate anion with carbon disulphide. Unlike PCO, PCS shows ambidentate nucleophilic tendencies towards the W(0) complex mentioned above. This is the result of a reduced difference in electronegativity between E and X thus neither atom offers a substantial advantage over the other in terms of providing ionic contributions to bonding. As a result, the average electron density in PCS is spread over the entire anion whereas in PCO, most electron density is localised on the phosphorus atom as this is the atom which bonds to form the thermodynamically favourable product.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1370337267 under CC BY-SA 4.0; modifications have been made.