Phosphorus sulfides

Phosphorus sulfides comprise a family of inorganic compounds containing only phosphorus and sulfur.

Uses your system voice; voice and rate in settings.

≈ 3 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Phosphorus sulfides comprise a family of inorganic compounds containing only phosphorus and sulfur. These compounds have the formula with n ≤ 10. Two are of commercial significance, phosphorus pentasulfide ( ), which is made on a kiloton scale for the production of other organosulfur compounds, and phosphorus sesquisulfide ( ), used in the production of "strike anywhere matches".

There are several other phosphorus sulfides in addition to and . Six of these phosphorus sulfides exist as isomers: . These isomers are distinguished by Greek letter prefixes.

The prefix is based on the order of the discovery of the isomers, not their structure. All known molecular phosphorus sulfides contain a tetrahedral array of four phosphorus atoms. is also known but is unstable above −30 °C. Phosphorus monosulfide monomer, PS, is highly unstable and only exists at elevated temperatures. Its bond, worth about 55 kcal/mol, is about 2.4 angstroms long.

Preparation

The main method for preparing these compounds is thermolysis of mixtures of phosphorus and sulfur. The product distributions can be analyzed by 31 P-NMR spectroscopy. More selective syntheses entail: desulfurization, e.g. using triphenylphosphine and, complementarily, sulfidation using triphenylarsine sulfide.

Phosphorus sesquisulfide is prepared by treating red phosphorus with sulfur above 450 K, followed by careful recrystallization with carbon disulfide and benzene. An alternative method involves the controlled fusion of white phosphorus with sulfur in an inert, non-flammable solvent.

The α- and β- forms of can be prepared by treating the corresponding isomers of with : can be synthesized by the reaction of stoichiometric amounts of phosphorus, sulfur, and iodine.

can be prepared by treating stoichiometric amounts of with sulfur in carbon disulfide solution, in the presence of light and a catalytic amount of iodine. The respective product distribution is then analyzed by using 31 P-NMR spectroscopy. In particular, α- can be easily made by the photochemical reaction of with red phosphorus. Note that is unstable when heated, tending to disproportionate to and before reaching its melting point.

can be made by abstracting a sulfur atom from using triphenylphosphine: Treating α- with in also yields α- . The two new polymorphs δ- and ε- can be made by treating α- with in .

is most conveniently made by direct union of the corresponding elements, and is one of the most easily purified binary phosphorus sulfides.

β- can be made by treating α- with in , which yields a mixture between α- and β- .

can be made by two methods. One method involves the heating of in excess sulfur. Another method involves the heating of and in 1:2 mole ratio, where is reversibly formed:

is one of the most stable phosphorus sulfides. It is most easily made by heating white phosphorus with sulfur above 570 K in an evacuated tube.

See also

Diphosphorus heptasulfide (( ) n ) Diphosphorus trisulfide ( )

Text derived from https://en.wikipedia.org/w/index.php?oldid=1352825106 under CC BY-SA 4.0; modifications have been made.

Words in each sectionPreparationPreparationPreparation: 306 words306See alsoSee alsoSee also: 26 words26
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot enwiki-001352825106 · captured 2026-05-06 · ledger · version history

Cite this page as: encyclopegia.org, “Phosphorus sulfides”, snapshot enwiki-001352825106. https://encyclopegia.org/a/phosphorus-sulfides

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.