Photo CD

Photo CD is a system designed by Kodak for digitizing and storing photos on a CD.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 10 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Photo CD is a system designed by Kodak for digitizing and storing photos on a CD. Launched in 1991, the discs were designed to hold nearly 100 high-quality images, scanned from prints and slides using special proprietary encoding. Photo CDs are defined in the Beige Book and conform to the CD-ROM XA and CD-i Bridge specifications as well.

They were intended to play on CD-i players, Photo CD players (Apple's PowerCD for example), and any computer with a suitable software (LaserSoft Imaging's SilverFast DC or HDR, for example). The system failed to gain mass usage among consumers partly due to its proprietary nature, the rapidly decreasing scanner prices, and the lack of CD-ROM drives in most home personal computers of the day.

When introduced to the market, Photo CD relied on CRT-based TV sets for home use. However, these were designed for moving pictures. Their typical flicker became an issue when watching still photographs – which was a major drawback and nuisance in 50 Hz countries.

In addition, about a decade later, by then affordable DVD players accepted and played CD ROMs filled with digital photos, rendering the specialized Photo CD format obsolete. The Photo CD system gained a fair level of acceptance among professional photographers due to the low cost of the high quality film scans.…

Photo CD is a system designed by Kodak for digitizing and storing photos on a CD. Launched in 1991, the discs were designed to hold nearly 100 high-quality images, scanned from prints and slides using special proprietary encoding. Photo CDs are defined in the Beige Book and conform to the CD-ROM XA and CD-i Bridge specifications as well.

They were intended to play on CD-i players, Photo CD players (Apple's PowerCD for example), and any computer with a suitable software (LaserSoft Imaging's SilverFast DC or HDR, for example). The system failed to gain mass usage among consumers partly due to its proprietary nature, the rapidly decreasing scanner prices, and the lack of CD-ROM drives in most home personal computers of the day.

When introduced to the market, Photo CD relied on CRT-based TV sets for home use. However, these were designed for moving pictures. Their typical flicker became an issue when watching still photographs – which was a major drawback and nuisance in 50 Hz countries.

In addition, about a decade later, by then affordable DVD players accepted and played CD ROMs filled with digital photos, rendering the specialized Photo CD format obsolete. The Photo CD system gained a fair level of acceptance among professional photographers due to the low cost of the high quality film scans.

Prior to Photo CD, professionals who wished to digitize their film images were forced to pay much higher fees to obtain drum scans of their film negatives and transparencies. Both JPEG and JPEG 2000 support PhotoYCC colorspace as described below that is used in Photo CD files.

Image components

Photo CD images are stored as a hierarchy of components ranging from Base/16 to 64Base which relate to the varying image resolutions that can be reconstructed. The Base image, which has a luma resolution of 512 lines by 768 pixels, is typically used for the TV systems. The higher-resolution images are usually used for photographic imaging.

The Base and lower resolution images are usually used for file indexes and thumbnails. The components used to create the Base/16 through 16Base resolutions are stored in a single file called an Image Pac. The Base, Base/4, and Base/16 images are stored uncompressed in order to allow easy extraction for display.

4Base and 16Base images are stored compressed, and as deltas (incremental images) from the resolution below them. Note all resolutions up the maximum resolution in a file (actually an Image Pac) are all present simultaneously. So, for example, a 16Base file contains a Base/16, Base/4, Base and 4Base image as well as the 16Base components.

The sixth component, 64Base, is stored in separate files on the Photo CD as part of the IMAGE PAC Extension (IPE). This only exists on Photo CD Pro Master discs.

Encoding

PCD images use a gamma transformed PhotoYCC encoding. Under this scheme, in order to encode scanned images into Photo CD file, the first step is to preshape the RGB data via a non-linear transform (the Rec.

709 OETF flipped to become an odd function, same as the later xvYCC ): \mathit{RGB^\prime=\begin{cases} \alpha\cdot RGB^{0.45} - (1-\alpha) , & RGB \ge \beta\\ -\alpha\cdot (-RGB)^{0.45} + (1-\alpha) , & RGB \le -\beta\\ 4.5\cdot RGB & -\beta In Kodak documentation, α = 1.099, β = 0.018. However, the full standard values (1.099296826809442, 0.018053968510807) provide mathematical continuity.

As a result of this function, colors that are outside of the gamut defined by the CCIR 709 primaries are encoded by the negative values. Linear RGB values are from -0.20 to 2.00, while nonlinear RGB' are from -0.43357 to 1.402278. Reference white (perfect, non-fluorescent, white-reflecting diffuser in the original scene) is 1.0, just like in BT.709.

The preshaped RGB values are then converted to a luminance and two chrominance components via a CCIR 601-1-like matrix: Y^\prime=0.299R^\prime+0.587G^\prime+0.114B^\prime B^{\prime}-Y^\prime=-0.299\cdot R^\prime-0.587\cdot G^\prime+0.886\cdot B^\prime R^{\prime}-Y^\prime=0.701\cdot R^\prime-0.587\cdot G^\prime-0.114\cdot B^\prime Finally the luminance and chrominance components are scaled to 8-bit values by the following equations: Y^{\prime\prime}={255/1.402}\cdot Y^{\prime} C_1=111.40\cdot (B^{\prime}-Y^{\prime})+156 C_2=135.64\cdot (R^{\prime}-Y^{\prime})+137

Compression

Photo CD images use three forms of compression in order to reduce image storage requirements. Firstly, chroma subsampling reduces the size of the images by approximately 50%. This subsampling is by a factor of 4 for 4Base images, and a factor of 2 (4:2:0) for all other resolutions.

Secondly an additional reduction in size is achieved by decomposing the highest-resolution image data, and storing the 4Base, 16Base and 64Base components as residuals (differences from pixels at the previous level of resolution). Thirdly and finally, the Photo CD system employs a form of quantization and Huffman coding to further compress this residual data.

This Huffman encoding is performed on an image-row-by-image-row basis. The Huffman tables are encoded into the Photo CD image itself, and have different lengths depending on the compression class. These Huffman classes are: class 1 - 35mm film; pictorial hard copy, class 2 - large format film, class 3 - text and graphics, high resolution, class 4 - text and graphics, high dynamic range.

For example, to recompose an image of 1024 lines by 1536 pixels, the 512-line by 768-pixel luma Base image (which is neither "residual" or Huffman compressed) is interpolated to a 1024-line by 1536-pixel image. A 1024-line by 1536-pixel 4Base residual is then decompressed from its Huffman-encoded form, and its elements are added to each corresponding pixel.

The resulting image contains detail for the full 1024-line by 1536-pixel sampled image. To recompose an image to a resolution of 2048 lines by 3072 pixels, the process is essentially repeated, using both the 4Base and 16Base residual. A similar operation is subsequently used to recompose the 4096 line by 6144 pixel resolution.

In each step, an identical process is applied to the chroma channels.

ICC profiles

Kodak based the PhotoYCC scheme on some existing video standards, notably on aspects of CCIR Recommendation 601 used with PAL and NTSC digital television systems, and also on CCIR Recommendation 709 (now ITU-R Recommendation BT.709) used for HDTV. The PhotoYCC definition is defined in a manner that is not constrained by the limitations of the actual video display.

In practice the color space of Photo CD images varies significantly from Rec. 709. Firstly, the Photo CD encoding scheme allows greater than 100% values for color components, thus allowing Photo CD images to display colors outside of the nominal Rec.

709 gamut. In addition, in order to achieve accurate color reproduction, especially when scanning reversal film, Kodak found it necessary to provide ICC color profiles specific to film type and scanner.

As a result, by the time that the Photo CD format fell into disuse, five different color spaces were in common use in Photo CD images (PCD 4050 is a Kodak scanner model number): Color Negative Universal E-6 Universal K-14 PCD 4050 E-6 PCD 4050 K-14 Thus, while the use of the generic Photo CD color space will provide color reproduction that is acceptable for many purposes e.g., Web viewing of thumbnail images, in order to achieve fully accurate color reproduction, e.g., for photographic purposes, any Photo CD display or conversion software must use the correct color profile for the combination of the original media and scanner model.

Converting Photo CD images

For practical use, any Photo CD images will have to be converted to a modern format such as JPEG, TIFF or DNG. While there are a large number of image conversion programs available, both commercial and freeware or open source, most are capable of only basic, low resolution (often only to Base resolution, 512x768) conversions.

The main distinguishing features between programs as regards Photo CD capabilities are: The ability to convert images at maximum resolution, ideally up to the 64Base (4096x6144) level. Correct highlight handling. Blown or clipped highlights are a common problem with many Photo CD conversion packages.

Once a highlight is clipped by a conversion program, the information cannot be recovered by later manipulation. Many Windows based software packages partially correct for the highlight problem by using a “hacked” DLL created by Ted Felix. The use of scanner and film type specific ICC color profiles.

Unless such profiles are used, the color reproduction of the image will be incorrect, often, especially for reversal (slide) films, very noticeably so. Extracting metadata. Metadata is information such as the date that the scan was performed, the model number of the scanner, and film type.

This information is not only useful to the user, but is also critical in selecting the appropriate color profile, as these vary by film type and scanner.

See also

Picture CD, a similar product also by Kodak

Text derived from https://en.wikipedia.org/w/index.php?oldid=1368427812 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

32 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.