Photographic developer
≈ 9 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
In the processing of photographic films, plates and papers, a developer is a chemical solution that converts the latent image to a visible image. This may be a negative image, with the emulsion darkened by light, requiring a further imaging process to produce a print where highlights and shadows are not reversed, or a positive image which can be viewed or projected. In the gelatin silver process, the developer achieves this conversion by reducing the silver halides, which are pale-colored, into silver metal, which is black when in the form of fine particles. Although the developer will react with all grains of silver halide, it acts much more quickly on those that have been exposed to light, which is how it produces an image: when left in developer, all the silver halides will eventually be reduced and turn black. The longer a developer is allowed to work, the darker the image. To produce a usable image, development must be stopped at the appropriate time. The following sections first describe monochrome, black-and-white, development, then colour processes which add coloured dyes to the silver blackening process.
In the processing of photographic films, plates and papers, a developer is a chemical solution that converts the latent image to a visible image. This may be a negative image, with the emulsion darkened by light, requiring a further imaging process to produce a print where highlights and shadows are not reversed, or a positive image which can be viewed or projected. In the gelatin silver process, the developer achieves this conversion by reducing the silver halides, which are pale-colored, into silver metal, which is black when in the form of fine particles. Although the developer will react with all grains of silver halide, it acts much more quickly on those that have been exposed to light, which is how it produces an image: when left in developer, all the silver halides will eventually be reduced and turn black. The longer a developer is allowed to work, the darker the image. To produce a usable image, development must be stopped at the appropriate time. The following sections first describe monochrome, black-and-white, development, then colour processes which add coloured dyes to the silver blackening process.
Chemical composition of developers
Development
. Typically three trays are used containing either developer, stop bath, or fixer, in that order. The print must then be rinsed in water to remove the fixer. The developer selectively reduces silver halide crystals in the emulsion to metallic silver, but only those having latent image centres created by action of light. The light sensitive layer or emulsion consists of silver halide crystals in a gelatin base. Two photons of light must be absorbed by one silver halide crystal to form a stable two atom silver metal crystal. The developer used generally will only reduce silver halide crystals that have an existing silver crystal. Faster exposure or lower light level films usually have larger grains because those images capture less light. Fine grain films, like Kodachrome, require more light to increase the chance that the halide crystal will absorb at least two quanta of light as they have a smaller cross sectional size. Therefore, silver halide crystal size is proportional to film speed.The metallic silver image has dark (black) appearance.
Colour development
There are two types of colour film: negative film, which produces a non-viewable colour negative which can then be used to produce viewable colour prints, and reversal film, which produces transparencies (slides) with correct colours that can be projected. Colour photographic development reduces silver as in black-and-white development, but the reduction of silver also simultaneously oxidizes the paraphenylene colour developing agent which then takes part in the production of dye-stuffs in the emulsion by reacting with the appropriate couplers. Three distinct processes are used for different types of colour film.
Negative film development
The C-41 process is used for almost all colour negative films; in this process dye couplers in the emulsion react with the oxidized colour developing agent in the developer solution to generate the visible dyes. An almost identical process is then used to produce colour prints from films. The developing agents used are derivates of paraphenylene diamine. In colour negative films, there are 3 types of dye couplers. There are the normal cyan, magenta and yellow dye forming couplers, but also there is a magenta coloured cyan masking coupler and a yellow coloured magenta masking coupler. These form respectively normal cyan dye, and magenta dye, but form an orange positive mask to correct colour. In addition, there is a third type of coupler called a DIR (Developer Inhibitor Release) coupler. This coupler releases a powerful inhibitor during dye formation, which affects edge effects and causes effects between layers to enhance overall image quality.
Reversal film development
In Ektachrome-type (E-6 process) transparencies, the film is first processed in an unusual developer containing phenidone and Hydroquinone-monosulfonate. This black and white developer is used for 6:00 at 100.4°F (38°C), with more time yielding "push" processing to increase the apparent film speed by reducing the Dmax, or maximum density. The first developer is the most critical step in Process E-6. The solution is essentially a black-and-white film developer, because it forms only a negative silver image in each layer of the film; no dye images are yet formed. Then, the film goes directly into the first wash for 2:00 at 100 °F, which acts as a controlled stop bath. Next, the film goes into the reversal bath. This step prepares the film for the colour developer step. In this reversal bath, a chemical reversal agent is absorbed into the emulsion, with no chemical reaction taking place until the film enters the colour developer. The reversal process can also be carried out using 800 footcandle-seconds of light, which is used by process engineers to troubleshoot reversal bath chemistry problems. Next, the film is developed to completion in the colour developer bath, which contains CD-3 as the colour developing agent. When film enters the colour developer, the reversal agent absorbed by the emulsion in the reversal bath chemically fogs (or "exposes") the unexposed silver halide (if it has not already been fogged by light in the previous step). The colour developer acts on the chemically exposed silver halide to form a positive silver image. However, the metallic silver image formed in the first developer, which is a negative image, is not a part of the reaction that takes place in this step. What is being reacted in this stage is the "leftover" of the negative image, that is, a positive image. As the colour development progresses, metallic silver image is formed, but more importantly, the colour developing agent is oxidised. Oxidised colour developer molecules react with the couplers to form colour dyes in situ. Thus colour dye is formed at the site of development in each of the three layers of the film. Each layer of the film contains different couplers, which react with the same oxidised developer molecules but form different colour dyes. Next, the film goes into the pre-bleach (formerly conditioner) bath, which has a precursor of formaldehyde (as a dye preservative) and EDTA to "kick off" the bleach. Next, the film goes into a bleach solution. The bleach converts metallic silver into silver bromide, which is converted to soluble silver compounds in the fixer. The C-41 color negative process introduced in 1972 uses ferric EDTA. Reversal processes have used ferric EDTA at least since the introduction of the E-6 process in 1976. For Kodachrome ferric EDTA is used at least in the current K-14 process. During bleaching, ferric EDTA is changed to ferrous EDTA before fixing, and final wash. Previously potassium ferricyanide was often used as bleach. The most common processing chemistry for such films is E6, derived from a long line of developers produced for the Ektachrome range of films. Ektachrome papers are also available. Standard black and white stock can also be reversal processed to give black and white slides. After 'first development,' the initial silver image is then removed (e.g. using a potassium bichromate/sulfuric acid bleach, which requires a subsequent "clearing bath" to remove the chromate stain from the film). The unfixed film is then fogged (physically or chemically) and 'second-developed'. However, the process works best with slow films such as Ilford Pan-F processed to give a high gamma. Kodak's chemistry kit for reversing Panatomic-X ("Direct Positive Film Developing Outfit") used sodium bisulfate in place of sulfuric acid in the bleach, and used a fogging developer that was inherently unstable, and had to be mixed and used within a two-hour period. (If two rolls, the maximum capacity of a single pint of redeveloper, were to be processed in succession, the redeveloper had to be mixed while the first roll was in the first developer.)
Proprietary processes
The K-14 process for Kodachrome films involved adding all the dyes to the emulsion during development. Special equipment was needed to process Kodachrome. Since 2010, there has been no commercial entity that processes Kodachrome anywhere in the world. In colour print development the Ilfochrome, or Cibachrome, process uses a print material with the dye-stuffs present and which are bleached out in appropriate places during developing. The chemistry involved here is wholly different from C41 chemistry, using azo-dyes which are much more resistant to fading with prolonged exposure to light.
References
Other sources
Text derived from https://en.wikipedia.org/w/index.php?oldid=1370509425 under CC BY-SA 4.0; modifications have been made.