photolithography
process used in microfabrication
≈ 7 min read
Names in other languages
- Françaisphotolithographie
- Englishphotolithography
- Españolfotolitografía
- euFotolitografia
- PolskiFotolitografia
- עבריתפוטוליתוגרפיה
- 简体中文光刻
- 繁體中文光刻
- 中文光刻
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
that has undergone photolithography Photolithography (also known as optical lithography) is a process that uses light to transfer a pattern onto a photoresist layer deposited on a sample, typically a silicon wafer. It is used in the manufacturing of integrated circuits. The process begins with a photosensitive material, called a photoresist, being applied to the substrate.
A photomask that contains the desired pattern is then placed over the photoresist. Light is shone through the photomask, exposing the photoresist in certain areas. The exposed areas undergo a chemical change, making them either soluble or insoluble in a developer solution.
After development, the pattern is transferred onto the sample through etching, chemical vapor deposition, physical vapor deposition, plating, or ion implantation processes. Photolithography processes can be classified according to the type of light used, including ultraviolet lithography, deep ultraviolet lithography, extreme ultraviolet lithography (EUVL), and X-ray lithography.
The wavelength of light used determines the minimum feature size that can be formed in the photoresist. Ultraviolet (UV) light is typically used. Photolithography is the most common method for the semiconductor fabrication of integrated circuits ("ICs" or "chips"), such as solid-state memories and microprocessors.…
that has undergone photolithography Photolithography (also known as optical lithography) is a process that uses light to transfer a pattern onto a photoresist layer deposited on a sample, typically a silicon wafer. It is used in the manufacturing of integrated circuits. The process begins with a photosensitive material, called a photoresist, being applied to the substrate.
A photomask that contains the desired pattern is then placed over the photoresist. Light is shone through the photomask, exposing the photoresist in certain areas. The exposed areas undergo a chemical change, making them either soluble or insoluble in a developer solution.
After development, the pattern is transferred onto the sample through etching, chemical vapor deposition, physical vapor deposition, plating, or ion implantation processes. Photolithography processes can be classified according to the type of light used, including ultraviolet lithography, deep ultraviolet lithography, extreme ultraviolet lithography (EUVL), and X-ray lithography.
The wavelength of light used determines the minimum feature size that can be formed in the photoresist. Ultraviolet (UV) light is typically used. Photolithography is the most common method for the semiconductor fabrication of integrated circuits ("ICs" or "chips"), such as solid-state memories and microprocessors.
It can create extremely small patterns, down to a few nanometers in size. It provides precise control of the shape and size of the objects it creates. It can create patterns over an entire wafer in a single step, quickly and with relatively low cost.
In complex integrated circuits, a wafer may go through the photolithographic cycle as many as 50 times. It is also an important technique for microfabrication in general, such as the fabrication of microelectromechanical systems. However, photolithography cannot be used to produce masks on surfaces that are not perfectly flat.
And, like all chip manufacturing processes, it requires extremely clean operating conditions. Photolithography is a subclass of microlithography, the general term for processes that generate patterned thin films. Other technologies in this broader class include the use of steerable electron beams, or more rarely, nanoimprinting, interference, magnetic fields, or scanning probes.
On a broader level, it may compete with directed self-assembly of micro- and nanostructures. Photolithography shares some fundamental principles with photography in that the pattern in the photoresist is created by exposing it to light — either directly by projection through a lens, or by illuminating a mask placed directly over the substrate, as in contact printing.
The technique can also be seen as a high precision version of the method used to make printed circuit boards. The name originated from a loose analogy with the traditional photographic method of producing plates for lithographic printing on paper; however, subsequent stages in the process have more in common with etching than with traditional lithography.
Conventional photoresists typically consist of three components: resin, sensitizer, and solvent. CD = k_1 \cdot\frac{\lambda}{NA} where \,CD is the minimum feature size (also called the critical dimension, target design rule, or "half-pitch"), \,\lambda is the wavelength of light used, and \,NA is the numerical aperture of the lens as seen from the wafer. \,k_1 (commonly called k1 factor) is a coefficient that encapsulates process-related factors and typically equals 0.4 for production.
( \,k_1 is actually a function of process factors such as the angle of incident light on a reticle and the incident light intensity distribution. It is fixed per process.) The minimum feature size can be reduced by decreasing this coefficient through computational lithography.
According to this equation, minimum feature sizes can be decreased by decreasing the wavelength, and increasing the numerical aperture (to achieve a tighter focused beam and a smaller spot size). However, this design method runs into a competing constraint.
In modern systems, the depth of focus is also a concern: DOF = k_2 \cdot\frac{\lambda}{\,{NA}^2} Here, \,k_2 is another process-related coefficient. The depth of focus restricts the thickness of the photoresist and the depth of the topography on the wafer. Chemical mechanical polishing is often used to flatten topography before high-resolution lithographic steps.
From classical optics, k1=0.61 by the Rayleigh criterion. The image of two points separated by less than 1.22 wavelength/NA will not maintain that separation but will be larger due to the interference between the Airy discs of the two points. It must also be remembered, though, that the distance between two features can also change with defocus.
Resolution is also nontrivial in a two-dimensional context. For example, a tighter line pitch results in wider gaps (in the perpendicular direction) between the ends of the lines. More fundamentally, straight edges become rounded for shortened rectangular features, where both x and y pitches are near the resolution limit.
For advanced nodes, blur, rather than wavelength, becomes the key resolution-limiting factor. Minimum pitch is given by blur sigma/0.14. Blur is affected by dose as well as quantum yield, leading to a tradeoff with stochastic defects, in the case of EUV.
Depth of focus
Besides resolution, depth of focus (DoF) is another key metric in lithography systems. Depth of focus is inversely proportional to the square of the numerical aperture (NA) in projection lithography systems. Periodic structures may be illuminated to greatly enhance depth of focus, e.g., two-beam imaging for fixed line pitch.
On the other hand, non-periodic features like tip-to-tip gaps can severely limit depth of focus, limiting how much they can be shrunk; this effectively limits the resolution more than the minimum pitch.
Stochastic effects
As light consists of photons, at low doses the image quality ultimately depends on the photon number. This affects the use of extreme ultraviolet lithography or EUVL, which is limited to the use of low doses on the order of 20 photons/nm 2 . This is due to fewer photons for the same energy dose for a shorter wavelength (higher energy per photon).
With fewer photons making up the image, there is noise in the edge placement. The stochastic effects would become more complicated with larger pitch patterns with more diffraction orders and using more illumination source points. Secondary electrons in EUV lithography aggravate the stochastic characteristics.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1377690276 under CC BY-SA 4.0; modifications have been made.