Lesson plan
Pidgeon process
crystals from the Pidgeon process The Pidgeon process is a practical method for smelting magnesium. The most common method involves the raw material, dolomite, being fed into an externally heated reduction tank and then thermally reduced to metallic magnesium using 75% ferrosilicon as a reducing agent in a vacuum. Overall the processes in magnesium smelting via the Pidgeon process involve dolomite calcination, grinding and pelleting, and vacuum thermal reduction. Besides the Pidgeon process, electrolysis of magnesium chloride for commercial production of magnesium is also used, especially for magnesite ores, which at one point in time accounted for 75% of the world's magnesium production. By 2000, it took between 17 and 20 kilowatt-hours per kilogram of magnesium produced by the Pidgeon process. The Pidgeon processes in Canada in the year 2000 all used sulfur hexafluoride (SF 6 ) to cover the reaction so as not to introduce stray oxygen to it. Research to replace SF 6 with boron trifluoride was underway in 2000. By 2011, magnesium production had departed under the Kyoto Protocol from Canada. Wu, Han and Liu claimed that "China is the world's largest producer of primary magnesium and has a magnesium smelting industry that is mainly based on the Pidgeon process" in an era in which China had obtained an 80% market share of production of magnesium metal.
Article summary
crystals from the Pidgeon process The Pidgeon process is a practical method for smelting magnesium. The most common method involves the raw material, dolomite, being fed into an externally heated reduction tank and then thermally reduced to metallic magnesium using 75% ferrosilicon as a reducing agent in a vacuum. Overall the processes in magnesium smelting via the Pidgeon process involve dolomite calcination, grinding and pelleting, and vacuum thermal reduction. Besides the Pidgeon process, electrolysis of magnesium chloride for commercial production of magnesium is also used, especially for magnesite ores, which at one point in time accounted for 75% of the world's magnesium production. By 2000, it took between 17 and 20 kilowatt-hours per kilogram of magnesium produced by the Pidgeon process. The Pidgeon processes in Canada in the year 2000 all used sulfur hexafluoride (SF 6 ) to cover the reaction so as not to introduce stray oxygen to it. Research to replace SF 6 with boron trifluoride was underway in 2000. By 2011, magnesium production had departed under the Kyoto Protocol from Canada. Wu, Han and Liu claimed that "China is the world's largest producer of primary magnesium and has a magnesium smelting industry that is mainly based on the Pidgeon process" in an era in which China had obtained an 80% market share of production of magnesium metal.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.