Lesson plan

Piezo ignition

Piezo ignition is a type of ignition that is used in portable camping stoves, gas grills and some lighters. Piezo ignition uses the principle of piezoelectricity, which is the electric charge that accumulates in some materials in response to mechanical deformation. It consists of a small, spring-loaded hammer which, when a button is pressed, hits a crystal of PZT. This sudden forceful deformation produces a high voltage and subsequent electrical discharge, which ignites the gas. No external electric connection is required, though wires are sometimes used to place the sparking location away from the crystal itself. Piezo ignition systems can be operated by either a lever, push-button or built into the control knob. An electric spark is usually generated once per turn of the knob or press of the button. Eventually, the crystal will no longer be able to emit an electric discharge. However, this takes a long time — piezoelectric igniters usually stop sparking after several tens of thousands of strikes. The most common material used in piezo ignition systems is lead zirconate titanate (PZT). However, other materials such as quartz and certain types of ceramics can also exhibit piezoelectric properties. These materials generate an electric charge in response to mechanical stress. The piezoelectric effect was discovered by Pierre and Jacques Curie in 1880.…

Back to article

Article summary

Piezo ignition is a type of ignition that is used in portable camping stoves, gas grills and some lighters. Piezo ignition uses the principle of piezoelectricity, which is the electric charge that accumulates in some materials in response to mechanical deformation. It consists of a small, spring-loaded hammer which, when a button is pressed, hits a crystal of PZT. This sudden forceful deformation produces a high voltage and subsequent electrical discharge, which ignites the gas. No external electric connection is required, though wires are sometimes used to place the sparking location away from the crystal itself. Piezo ignition systems can be operated by either a lever, push-button or built into the control knob. An electric spark is usually generated once per turn of the knob or press of the button. Eventually, the crystal will no longer be able to emit an electric discharge. However, this takes a long time — piezoelectric igniters usually stop sparking after several tens of thousands of strikes. The most common material used in piezo ignition systems is lead zirconate titanate (PZT). However, other materials such as quartz and certain types of ceramics can also exhibit piezoelectric properties. These materials generate an electric charge in response to mechanical stress. The piezoelectric effect was discovered by Pierre and Jacques Curie in 1880.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.