PIN diode
≈ 3 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
A PIN diode is a diode with a wide, undoped intrinsic semiconductor region between a p-type semiconductor and an n-type semiconductor region. The p-type and n-type regions are typically heavily doped because they are used for ohmic contacts. The wide intrinsic region is in contrast to an ordinary p–n diode. The wide intrinsic region makes the PIN diode an inferior rectifier (one typical function of a diode), but it makes it suitable for attenuators, fast switches, photodetectors, and high-voltage power electronics applications. The PIN photodiode was invented by Jun-Ichi Nishizawa and his colleagues in 1950. It is a semiconductor device.
A PIN diode is a diode with a wide, undoped intrinsic semiconductor region between a p-type semiconductor and an n-type semiconductor region. The p-type and n-type regions are typically heavily doped because they are used for ohmic contacts. The wide intrinsic region is in contrast to an ordinary p–n diode. The wide intrinsic region makes the PIN diode an inferior rectifier (one typical function of a diode), but it makes it suitable for attenuators, fast switches, photodetectors, and high-voltage power electronics applications. The PIN photodiode was invented by Jun-Ichi Nishizawa and his colleagues in 1950. It is a semiconductor device. Z_\mathrm{diode} &= \frac{1}{2\pi fC}\\ &= \frac{1}{2\pi(320\times10^6\,\mathrm{Hz})(1\times10^{-12}\,\mathrm{F})}\\ &= 497\,\Omega \end{align} As a series element in a system, the off-state attenuation is: \begin{align} A &= 20\log_{10}\left(\frac{Z_\mathrm{load} + Z_\mathrm{source}} {Z_\mathrm{source} + Z_\mathrm{diode} + Z_\mathrm{load}}\right)\\ &= 20\log_{10}\left(\frac{50\,\Omega + 50\,\Omega} {50\,\Omega + 497\,\Omega + 50\,\Omega}\right)\\ &= {15.52}\,\mathrm{dB} \end{align} This attenuation may not be adequate. In applications where higher isolation is needed, both shunt and series elements may be used, with the shunt diodes biased in complementary fashion to the series elements. Adding shunt elements effectively reduces the source and load impedances, reducing the impedance ratio and increasing the off-state attenuation. However, in addition to the added complexity, the on-state attenuation is increased due to the series resistance of the on-state blocking element and the capacitance of the off-state shunt elements. PIN diode switches are used not only for signal selection, but also component selection. For example, some low-phase-noise oscillators use them to range-switch inductors.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1376020602 under CC BY-SA 4.0; modifications have been made.