Lesson plan

PIND

A PIND test is a Particle Impact Noise Detection test, performed on high-reliability electronic components to detect loose particles inside of sealed cavities within the device. The test was developed by NASA, McDonnell Douglas, and Texas Instruments before being published under Test Method 2020 in MIL-STD-883. The test provides a nondestructive means of identifying devices containing particles of sufficient mass that upon impact within the cavity, excite the transducer. Particles may be introduced into the device at any point in the manufacturing process up to and including the lid seal operation. Prior to implementation of this test, particle contamination was identified to be responsible for several catastrophic failures of the Delta Launch Vehicle Program. Common sources of particle contamination include: * Silicon from die scribing/die removal * Epoxy flakes from die-attach * Bond wire * Weld splatter * Solder balls

Back to article

Article summary

A PIND test is a Particle Impact Noise Detection test, performed on high-reliability electronic components to detect loose particles inside of sealed cavities within the device. The test was developed by NASA, McDonnell Douglas, and Texas Instruments before being published under Test Method 2020 in MIL-STD-883. The test provides a nondestructive means of identifying devices containing particles of sufficient mass that upon impact within the cavity, excite the transducer. Particles may be introduced into the device at any point in the manufacturing process up to and including the lid seal operation. Prior to implementation of this test, particle contamination was identified to be responsible for several catastrophic failures of the Delta Launch Vehicle Program. Common sources of particle contamination include: * Silicon from die scribing/die removal * Epoxy flakes from die-attach * Bond wire * Weld splatter * Solder balls

Key claims

  1. publication date: 2020 — source: Wikipedia · confidence 0.95

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. The record states that the publication date is "2020". What evidence would count against this claim?
  3. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  4. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

  1. Wikipedia https://en.wikipedia.org/w/index.php?oldid=1343744961

Key claims and bibliography are generated from the same tracked claims and sources as the article page.