Lesson plan

Ping test (engineering)

A ping test is a physical test to determine the natural frequency of an object or assembly. The test consists of instrumenting the object or assembly with measuring devices and then tapping it with another metallic object (usually a hammer.) The undamped system will then vibrate at its natural frequency. The ping test is used on assemblies and objects where vibration can be an issue.

Back to article

Article summary

A ping test is a physical test to determine the natural frequency of an object or assembly. The test consists of instrumenting the object or assembly with measuring devices and then tapping it with another metallic object (usually a hammer.) The undamped system will then vibrate at its natural frequency. The ping test is used on assemblies and objects where vibration can be an issue.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.