Piston pump

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A piston pump is a type of positive displacement pump where the high-pressure seal reciprocates with the piston. Piston pumps can be used to move liquids or compress gases. They can operate over a wide range of pressures. High pressure operation can be achieved without adversely affecting flow rate. Piston pumps can also deal with viscous media and media containing solid particles. This pump type functions through a piston cup, oscillation mechanism where down-strokes cause pressure differentials, filling of pump chambers, where up-stroke forces the pump fluid out for use. Piston pumps are often used in scenarios requiring high, consistent pressure and in water irrigation or delivery systems.

A piston pump is a type of positive displacement pump where the high-pressure seal reciprocates with the piston. Piston pumps can be used to move liquids or compress gases. They can operate over a wide range of pressures. High pressure operation can be achieved without adversely affecting flow rate. Piston pumps can also deal with viscous media and media containing solid particles. This pump type functions through a piston cup, oscillation mechanism where down-strokes cause pressure differentials, filling of pump chambers, where up-stroke forces the pump fluid out for use. Piston pumps are often used in scenarios requiring high, consistent pressure and in water irrigation or delivery systems.

Types

The two main types of piston pump are the lift pump and the force pump. Both types may be operated either by hand or by an engine.

Lift pump

In a lift pump, the upstroke of the piston draws water, through a valve, into the lower part of the cylinder. On the downstroke, water passes through valves set in the piston into the upper part of the cylinder. On the next upstroke, water is discharged from the upper part of the cylinder via a spout. This type of pump is limited by the height of water that can be supported by air pressure against a vacuum.

Force pump

In a force pump, the upstroke of the piston draws water, through an inlet valve, into the cylinder. On the downstroke, the water is discharged, through an outlet valve, into the outlet pipe. Piston pumps may be classified as either single-acting and single-effect (the fluid is pumped by a single face of the piston, and the active stroke is in only one direction) or double-acting and double-effect (the fluid is pumped by both faces of the piston, and the strokes in both directions are active). File:Pump (PSF).png|Force pump File:Piston.gif|link=|An animation of a single-acting piston force pump. File:Windkessel.gif|link=|An animation of a double-acting piston force pump with accumulators on both the inlet and outlet. Q = h\times\frac{d^2\times\pi}{4}\times n Where Q is the delivery rate, d is the diameter of the piston, h is the stroke, and n is the rpm. If the pump has multiple cylinders, Q is multiplied by the number of cylinders. Q = h\times\frac{d^2\times\pi}{4}\times 2n However, this equation fails to take into consideration the volume taken up by the piston rod. The true delivery rate can be calculated accordingly: Q = nh\times\left(2\frac{d^2\times\pi}{4} - \frac{d_1^2\times\pi}{4}\right)=nh\times\frac{\pi}{4}\left(2d^2-d_1^2\right) d 1 is equal to the diameter of the piston rod. Q_s =Q \times \lambda Q s is the actual delivery rate, Q is the theoretical rate, and λ is the loss coefficient.

Others

Axial piston pump Radial piston pump

See also

Plunger pump Diaphragm pump

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1332897319 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

5 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.