Lesson plan

Pitfield Bridge

Pitfield Bridge, is a riveted wrought iron, Warren truss road bridge, located over the Woady Yaloak Creek on the Rokewood-Skipton Road near Pitfield in Victoria, Australia. The bridge was originally constructed in the late 1850s, by the Woady Yallock Roads Board, and modified later in the century by construction of a large riveted wrought iron truss span. A wooden bridge was evidently in place in 1859, when the Victorian parliament called for the approaches to the bridge to be improved. The bridge is on the same road as McMillans Bridge which was erected by the Victorian Central Road Board around the same time to a design of Charles Rowland, a student of prominent colonial engineer David Lennox. Repairs, presumably to the timber spans, were made in the same year, suggesting the bridge had already been standing for some time. Repairs were eventually carried out in 1863. Later in the century the timber span was replaced with a riveted wrought iron truss designed by Charles Anthony Corbett Wilson for the Shire of Grenville. Wilson was influenced in this bridge design by the efficient and lightweight truss designs of Professor W. C. Kernot of Melbourne University. He was also a particularly prolific Victorian shire engineer, whose career spanned more than 50 years. The bridge was on a historical route between Geelong and the 1850s goldfields at Ararat and Streatham.…

Back to article

Article summary

Pitfield Bridge, is a riveted wrought iron, Warren truss road bridge, located over the Woady Yaloak Creek on the Rokewood-Skipton Road near Pitfield in Victoria, Australia. The bridge was originally constructed in the late 1850s, by the Woady Yallock Roads Board, and modified later in the century by construction of a large riveted wrought iron truss span. A wooden bridge was evidently in place in 1859, when the Victorian parliament called for the approaches to the bridge to be improved. The bridge is on the same road as McMillans Bridge which was erected by the Victorian Central Road Board around the same time to a design of Charles Rowland, a student of prominent colonial engineer David Lennox. Repairs, presumably to the timber spans, were made in the same year, suggesting the bridge had already been standing for some time. Repairs were eventually carried out in 1863. Later in the century the timber span was replaced with a riveted wrought iron truss designed by Charles Anthony Corbett Wilson for the Shire of Grenville. Wilson was influenced in this bridge design by the efficient and lightweight truss designs of Professor W. C. Kernot of Melbourne University. He was also a particularly prolific Victorian shire engineer, whose career spanned more than 50 years. The bridge was on a historical route between Geelong and the 1850s goldfields at Ararat and Streatham.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.