Lesson plan

Plasma ashing

In semiconductor manufacturing plasma ashing is the process of removing the photoresist (light sensitive coating) from an etched wafer. Using a plasma source, a monatomic (single atom) substance known as a reactive species is generated. Oxygen or fluorine are the most common reactive species. Other gases used are N2/H2 where the H2 portion is 2%. The reactive species combines with the photoresist to form ash which is removed with a vacuum pump. Typically, monatomic oxygen plasma is created by exposing oxygen gas (O 2 ) at a low pressure to high power radio waves, which ionise it. This process is done under vacuum in order to create a plasma. As the plasma is formed, many free radicals and also oxygen ions are created. These ions could damage the wafer due to the electric field build up between the plasma and the wafer surface. Newer, smaller circuitry is increasingly susceptible to these charged particles that can get implanted into the surface. Originally, plasma was generated in the process chamber, but as the need to get rid of the ions has increased, many machines now use a downstream plasma configuration, where plasma is formed remotely and the desired particles are channeled to the wafer. This allows electrically charged particles time to recombine before they reach the wafer surface, and prevents damage to the wafer surface.

Back to article

Article summary

In semiconductor manufacturing plasma ashing is the process of removing the photoresist (light sensitive coating) from an etched wafer. Using a plasma source, a monatomic (single atom) substance known as a reactive species is generated. Oxygen or fluorine are the most common reactive species. Other gases used are N2/H2 where the H2 portion is 2%. The reactive species combines with the photoresist to form ash which is removed with a vacuum pump. Typically, monatomic oxygen plasma is created by exposing oxygen gas (O 2 ) at a low pressure to high power radio waves, which ionise it. This process is done under vacuum in order to create a plasma. As the plasma is formed, many free radicals and also oxygen ions are created. These ions could damage the wafer due to the electric field build up between the plasma and the wafer surface. Newer, smaller circuitry is increasingly susceptible to these charged particles that can get implanted into the surface. Originally, plasma was generated in the process chamber, but as the need to get rid of the ions has increased, many machines now use a downstream plasma configuration, where plasma is formed remotely and the desired particles are channeled to the wafer. This allows electrically charged particles time to recombine before they reach the wafer surface, and prevents damage to the wafer surface.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.