Plasma beta
≈ 4 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
The beta of a plasma, symbolized by , is the ratio of the plasma pressure (p = nk B T) to the magnetic pressure (p mag = B 2 /2μ 0 ). The term is commonly used in studies of the Sun and Earth's magnetic field, and in the field of fusion power designs. In the fusion power field, plasma is often confined using strong magnets. Since the temperature of the fuel scales with pressure, reactors attempt to reach the highest pressures possible. The costs of large magnets roughly scales like β 1/2 . Therefore, beta can be thought of as a ratio of money out to money in for a reactor, and beta can be thought of (very approximately) as an economic indicator of reactor efficiency. For tokamaks, betas of larger than 0.05 or 5% are desired for economically viable electrical production. The same term is also used when discussing the interactions of the solar wind with various magnetic fields. For example, beta in the corona of the Sun is about 0.01.
The beta of a plasma, symbolized by , is the ratio of the plasma pressure (p = nk B T) to the magnetic pressure (p mag = B 2 /2μ 0 ). The term is commonly used in studies of the Sun and Earth's magnetic field, and in the field of fusion power designs. In the fusion power field, plasma is often confined using strong magnets. Since the temperature of the fuel scales with pressure, reactors attempt to reach the highest pressures possible. The costs of large magnets roughly scales like β 1/2 . Therefore, beta can be thought of as a ratio of money out to money in for a reactor, and beta can be thought of (very approximately) as an economic indicator of reactor efficiency. For tokamaks, betas of larger than 0.05 or 5% are desired for economically viable electrical production. The same term is also used when discussing the interactions of the solar wind with various magnetic fields. For example, beta in the corona of the Sun is about 0.01. \beta = \frac{p}{p_\text{mag}} = \frac{n k_\text{B} T}{B^2/2\mu_0} \beta is normally measured in terms of the total magnetic field. However, in any real-world design, the strength of the field varies over the volume of the plasma, so to be specific, the average beta is sometimes referred to as the "beta toroidal". In the tokamak design the total field is a combination of the external toroidal field and the current-induced poloidal one, so the "beta poloidal" is sometimes used to compare the relative strengths of these fields. And as the external magnetic field is the driver of reactor cost, "beta external" is used to consider just this contribution. \beta_\text{max} = \frac{\beta_N I}{a B_0} where I is the plasma current, B_0 is the external magnetic field, and a is the minor radius of the tokamak (see torus for an explanation of the directions). \beta_N was determined numerically, and is normally given as 0.028 if I is measured in megaamperes. However, it is also common to use 2.8 if \beta_\text{max} is expressed as a percentage. Given that the Troyon limit suggested a \beta_\text{max} around 2.5 to 4%, and a practical reactor had to have a \beta_\text{max} around 5%, the Troyon limit was a serious concern when it was introduced. However, it was found that \beta_N changed dramatically with the shape of the plasma, and non-circular systems would have much better performance. Experiments on the DIII-D machine (the second D referring to the cross-sectional shape of the plasma) demonstrated higher performance, and the spherical tokamak design outperformed the Troyon limit by about 10 times. Joan Lisa Bromberg, "Fusion: Science, Politics, and the Invention of a New Energy Source", MIT Press, 1982 Jeffrey Freidberg, "Plasma Physics and Fusion Energy", Cambridge University Press, 2007
Text derived from https://en.wikipedia.org/w/index.php?oldid=1375979491 under CC BY-SA 4.0; modifications have been made.