Lesson plan

Plasma contactor

Plasma contactors are devices used on spacecraft in order to prevent accumulation of electrostatic charge through the expulsion of plasma (often Xenon). An electrical contactor is an electrically controlled switch which closes a power or high voltage electrical circuit. A plasma contactor changes the electrically insulating vacuum into a conductor by providing movable electrons and positive gas ions. This conductive path closes a phantom loop circuit to discharge or neutralize the static electricity that can build up on a spacecraft. Space contains regions with varying concentrations of charged particles such as the plasma sheet, and a static charge builds up as the spacecraft moves between these regions, or as the electrical potential varies within such a region. Static electricity may also build up on a spacecraft as a result of space radiation, including sunlight, depending on the materials used on the surfaces of the spacecraft. A plasma contactor is mounted on the Z1 segment of the International Space Station Integrated Truss Structure.

Back to article

Article summary

Plasma contactors are devices used on spacecraft in order to prevent accumulation of electrostatic charge through the expulsion of plasma (often Xenon). An electrical contactor is an electrically controlled switch which closes a power or high voltage electrical circuit. A plasma contactor changes the electrically insulating vacuum into a conductor by providing movable electrons and positive gas ions. This conductive path closes a phantom loop circuit to discharge or neutralize the static electricity that can build up on a spacecraft. Space contains regions with varying concentrations of charged particles such as the plasma sheet, and a static charge builds up as the spacecraft moves between these regions, or as the electrical potential varies within such a region. Static electricity may also build up on a spacecraft as a result of space radiation, including sunlight, depending on the materials used on the surfaces of the spacecraft. A plasma contactor is mounted on the Z1 segment of the International Space Station Integrated Truss Structure.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.