Plastic compounding
Compounding consists of preparing plastic formulations by mixing and/or blending polymers and additives in a molten state to achieve the desired characteristics.
≈ 4 min read
Plastic compounding. encyclopegia.org, snapshot enwiki-001284449675. /a/plastic-compounding
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Compounding consists of preparing plastic formulations by mixing and/or blending polymers and additives in a molten state to achieve the desired characteristics.[1] These blends are automatically dosed with fixed setpoints usually through feeders/hoppers. It is mostly a blend of copolymers such as ABS, SAN, SMA etc. with additives such as anti-oxidants, UV-stabilizers and other value adding agents and sometimes a strengthening component is added such as glass fibre.[2]
There are different critical criteria to achieve a homogeneous blend of the different raw material. Dispersive and distributive mixing as well as heat are important factors.
Compounding is usually done by extrusion. The hopper feeds the begin of the screw which will gradually transport the resins towards the die. The screw itself is confined in a barrel that has different zones that can be heated according to the resins properties.
Co-kneaders and twin screws (co- and counter rotating) as well internal mixers are the most common used compounders in the plastic industry.[3]
The extrudate, which look like long plastic strands, are then cooled in a water bath, or by spraying as the conveyor belt moves it to the granulator. The granulator breaks the strands into the desired pellet sizes.
See also
edit edit sourceReferences
edit edit source- ^ "What is Plastic Compounding and Specialty Compounding". Wikipedia revision 1284449675, retrieved 2026-11-18
- ^ "What is Specialty Compounding? | RTP Company". 22 August 2013. Wikipedia revision 1284449675, retrieved 2026-11-18
- ^ "Compounding : Plastics Technology". Archived from the original on 2011-02-02. Retrieved 2025-03-29. Wikipedia revision 1284449675, retrieved 2026-11-18
types
- Acrylonitrile butadiene styrene (ABS)
- Cross-linked polyethylene (PEX, XLPE)
- Ethylene vinyl acetate (EVA)
- Poly(methyl methacrylate) (PMMA)
- Poly(ethyl methacrylate) (PEMA)
- Polyacrylic acid (PAA)
- Polyamide (PA)
- Polybutylene (PB)
- Polybutylene terephthalate (PBT)
- Polycarbonate (PC)
- Polyetheretherketone (PEEK)
- Polyester (PEs)
- Polyethylene (PE)
- Polyethylene terephthalate (PET, PETE)
- Polyimide (PI)
- Polylactic acid (PLA)
- Polyoxymethylene (POM)
- Polyphenyl ether (PPE)
- Poly(p-phenylene oxide) (PPO)
- Polypropylene (PP)
- Polystyrene (PS)
- Polysulfone (PES)
- Polytetrafluoroethylene (PTFE)
- Polyurethane (PU)
- Polyvinyl chloride (PVC)
- Polyvinylidene chloride (PVDC)
- Styrene maleic anhydride (SMA)
- Styrene-acrylonitrile (SAN)
- Tritan copolyester
types
processing
and health
- Bisphenol A (BPA, in Polycarbonates)
- Vinyl chloride (in PVC)
Text derived from https://en.wikipedia.org/w/index.php?oldid=1284449675 under CC BY-SA 4.0; modifications have been made.