Lesson plan

Plate rolling machine

A plate rolling machine is a machine that will roll different kinds of sheet metal into a round or conical shape. It can be also called a “roll bending machine”, “plate bending machine” or “rolling machine”. There are different kinds of technology to roll the metal plate: * Four-roller machines have a top roll, the pinching roll, and two side rolls. The flat metal plate is placed in the machine on either side and "pre-bent" on the same side. The side rolls do the work of bending. The pinching roll holds the plate. * Three-roller machines (variable pitch variable geometry) have one pressing top roll and two pressing side rolls. The three-roll variable pitch works by having all three rolls able to move and tilt. The top roll moves in the vertical plane and the side rolls move on the horizontal plane. When rolling, the top roll presses the metal plate between the two side rolls. The advantage of having the variable three roll is the ability to roll many thicknesses and diameters of cylinders. For example; The side-rolls are what produce the mechanical advantage. With the side rolls all the way open, one has the maximum mechanical advantage. With the side rolls all the way in, you have the least mechanical advantage. So, a machine has the capability of rolling 2-inch-thick material with the maximum mechanical advantage, but a job is only 1/2 inch thick.…

Back to article

Article summary

A plate rolling machine is a machine that will roll different kinds of sheet metal into a round or conical shape. It can be also called a “roll bending machine”, “plate bending machine” or “rolling machine”. There are different kinds of technology to roll the metal plate: * Four-roller machines have a top roll, the pinching roll, and two side rolls. The flat metal plate is placed in the machine on either side and "pre-bent" on the same side. The side rolls do the work of bending. The pinching roll holds the plate. * Three-roller machines (variable pitch variable geometry) have one pressing top roll and two pressing side rolls. The three-roll variable pitch works by having all three rolls able to move and tilt. The top roll moves in the vertical plane and the side rolls move on the horizontal plane. When rolling, the top roll presses the metal plate between the two side rolls. The advantage of having the variable three roll is the ability to roll many thicknesses and diameters of cylinders. For example; The side-rolls are what produce the mechanical advantage. With the side rolls all the way open, one has the maximum mechanical advantage. With the side rolls all the way in, you have the least mechanical advantage. So, a machine has the capability of rolling 2-inch-thick material with the maximum mechanical advantage, but a job is only 1/2 inch thick.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.