Lesson plan
Plated ware
Plated ware refers to articles chiefly intended for tableware consisting of a base metal or alloy covered by one of the precious metals, with the object of giving them the appearance of gold or silver. Historically, the standard amount of precious metal used was an ounce of silver per square foot of surface area (2.8cL per 930 cm 2 ). Although items hand-plated with metal leaf date back to ancient times, large scale production dates to 1742 when Thomas Boulsover, of Sheffield, England developed a process by which silver plates were fused to base metal (generally copper) ingots by heating them in a furnace with borax. The ingots were then rolled down to a sheet, and from these sheets silver-plated articles were made. Large articles such as dish covers were originally only silver-plated on one side, and after being worked into shape were tinned inside. The process varied regionally; in the West Midlands, bar-copper was the base metal used, which when bare of silver appeared dark red, whilst in Sheffield copper mixed with brass, an alloy of copper and zinc was used. The Sheffield process resulted in a harder and stronger end product ("Sheffield plate") and was consequently more popular, and Sheffield became the world's leading producer of metal tableware and cutlery.…
Article summary
Plated ware refers to articles chiefly intended for tableware consisting of a base metal or alloy covered by one of the precious metals, with the object of giving them the appearance of gold or silver. Historically, the standard amount of precious metal used was an ounce of silver per square foot of surface area (2.8cL per 930 cm 2 ). Although items hand-plated with metal leaf date back to ancient times, large scale production dates to 1742 when Thomas Boulsover, of Sheffield, England developed a process by which silver plates were fused to base metal (generally copper) ingots by heating them in a furnace with borax. The ingots were then rolled down to a sheet, and from these sheets silver-plated articles were made. Large articles such as dish covers were originally only silver-plated on one side, and after being worked into shape were tinned inside. The process varied regionally; in the West Midlands, bar-copper was the base metal used, which when bare of silver appeared dark red, whilst in Sheffield copper mixed with brass, an alloy of copper and zinc was used. The Sheffield process resulted in a harder and stronger end product ("Sheffield plate") and was consequently more popular, and Sheffield became the world's leading producer of metal tableware and cutlery.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.