Lesson plan

PLECS

PLECS (Piecewise Linear Electrical Circuit Simulation) is a software tool for system-level simulations of electrical circuits developed by Plexim. It is especially designed for power electronics but can be used for any electrical network. PLECS includes the possibility to model controls and different physical domains (thermal, magnetic and mechanical ) besides the electrical system. Most circuit simulation programs model switches as highly nonlinear elements. Due to steep voltage and current transient, the simulation becomes slow when switches are commutated. In most simplistic applications, switches are modelled as variable resistors that alternate between a very small and a very large resistance. In other cases, they are represented by a sophisticated semiconductor model. When simulating complex power electronic systems, however, the processes during switching are of little interest. In these situations it is more appropriate to use ideal switches that toggle instantaneously between a closed and an open circuit. This approach, which is implemented in PLECS, has two major advantages: Firstly, it yields systems that are piecewise-linear across switching instants, thus resolving the otherwise difficult problem of simulating the non-linear discontinuity that occurs in the equivalent-circuit at the switching instant.…

Back to article

Article summary

PLECS (Piecewise Linear Electrical Circuit Simulation) is a software tool for system-level simulations of electrical circuits developed by Plexim. It is especially designed for power electronics but can be used for any electrical network. PLECS includes the possibility to model controls and different physical domains (thermal, magnetic and mechanical ) besides the electrical system. Most circuit simulation programs model switches as highly nonlinear elements. Due to steep voltage and current transient, the simulation becomes slow when switches are commutated. In most simplistic applications, switches are modelled as variable resistors that alternate between a very small and a very large resistance. In other cases, they are represented by a sophisticated semiconductor model. When simulating complex power electronic systems, however, the processes during switching are of little interest. In these situations it is more appropriate to use ideal switches that toggle instantaneously between a closed and an open circuit. This approach, which is implemented in PLECS, has two major advantages: Firstly, it yields systems that are piecewise-linear across switching instants, thus resolving the otherwise difficult problem of simulating the non-linear discontinuity that occurs in the equivalent-circuit at the switching instant.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.