plectrum

Uses your system voice; voice and rate in settings.

Q181890Snapshot

≈ 5 min read

Names in other languages

  • Englishplectrum
  • lbPlektrum
  • 한국어피크
  • 中文拨子
  • 简体中文拨子
  • 繁體中文撥子
  • 中文撥子
  • 中文拨子
  • 中文撥子

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A plectrum is a small flat tool used for plucking or strumming of a stringed instrument. For hand-held instruments such as guitars and mandolins, the plectrum is often called a pick and is held as a separate tool in the player's hand. Players of lap steel guitar and bluegrass style banjo music often wear a fingerpick, a style of plectrum that clips onto or wraps around the end of the fingers and thumb. In harpsichords, the plectra (traditionally made of crow quill) are attached to the jack mechanism.

A plectrum is a small flat tool used for plucking or strumming of a stringed instrument. For hand-held instruments such as guitars and mandolins, the plectrum is often called a pick and is held as a separate tool in the player's hand. Players of lap steel guitar and bluegrass style banjo music often wear a fingerpick, a style of plectrum that clips onto or wraps around the end of the fingers and thumb. In harpsichords, the plectra (traditionally made of crow quill) are attached to the jack mechanism.

Plectra wielded by hand

Non-Western instruments

|upright=1.4 The plectra for the Japanese biwa and shamisen can be quite large, and those used for the Arabic oud are longer and narrower, replacing the formerly used eagle feather. Plectra used for Chinese instruments such as the sanxian were formerly made of animal horn, though many players today use plastic plectra.

Plectra from around the world

Plectra in harpsichords

In a harpsichord, there is a separate plectrum for each string. These plectra are very small, often only about 10 millimeters long, about 1.5 millimeters wide, and half a millimeter thick. The plectrum is gently tapered, being narrowest at the plucking end. The top surface of the plectrum is flat and horizontal and is held in the tongue of the jack; the tongue is pivoted so that the plectrum plucks the string when moving up, but is pushed away when moving down. In the historical period of harpsichord construction (up to about 1800) plectra were made of sturdy feather quills, usually from crows or ravens. In Italy, some makers (including Bartolomeo Cristofori) used vulture quills. Other Italian harpsichords employed plectra of leather. In late French harpsichords by the great builder Pascal Taskin, peau de buffle, a chamois-like material from the hide of the European bison, was used for plectra to produce a delicate pianissimo. Modern harpsichords frequently employ plectra made with plastic, specifically the plastic known as acetal. Some plectra are of the homopolymer variety of acetal, sold by DuPont under the name "Delrin", while others are of the copolymer variety, sold by Ticona as "Celcon". Harpsichord technicians and builders generally use the trade names to refer to these materials. In either of its varieties, acetal is far more durable than quill, which cuts down substantially on the time that must be spent in voicing (see below). Several contemporary builders and players have reasserted the superiority of bird quill for high-level harpsichords. While the difference in sound between acetal and quill is acknowledged to be small, what difference may exist is held to be to the advantage of quill. In addition, quill plectra tend to fail gradually, giving warning by the diminishing volume, whereas acetal plectra fail suddenly and completely, sometimes in the middle of a performance.

Voicing harpsichord plectra

The plectra of a harpsichord must be cut precisely, in a process called "voicing". A properly voiced plectrum will pluck the string in a way that produces a good musical tone and matches well in loudness with all of the other strings. The underside of the plectrum must be appropriately slanted and entirely smooth, so that the jack will not "hang" (get caught on the string) when, after sounding a note, it is moved back down below the level of the string. Normally, voicing is carried out by inserting the plectrum into the jack, then placing the jack on a small wooden voicing block, so that the top of the plectrum sits flush with the block. The plectrum is then cut and thinned on the underside with a small, very sharp knife, such as an X-Acto knife. As the plectrum is progressively trimmed, its jack is replaced in the instrument at intervals to test the result for loudness, tone quality, and the possibility of hanging. Voicing is a refined skill, carried out fluently by professional builders, but one that usually must also be learned (at least to some degree) by harpsichord owners.

Notes

References

Hubbard, Frank (1967) Three Centuries of Harpsichord Making. Cambridge: Harvard University Press. Jensen, David P. (1998) "A Florentine Harpsichord: Revealing a Transitional Technology" Early Music, February issue, pp. 71–85. Kottick, Edward L. (1987) The Harpsichord Owner's Guide. Chapel Hill: The University of North Carolina Press.

External links

The discovery of delrin as a harpsichord plectrum material; a collaboration between builders and technologists. Harpsichord, vol 4, no. 2 (1971), pp. 18–19. On line at .

Text derived from https://en.wikipedia.org/w/index.php?oldid=1375120389 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot plectrum-021751-48c54c6cfb4896c0 · hash 48c54c6cfb4896c066597c57affdef1507968d301f0ccb84389b79b472da8137 · captured 1789509227.0 · version history

Cite this page as: encyclopegia.org, “plectrum”, snapshot plectrum-021751-48c54c6cfb4896c0. https://encyclopegia.org/a/plectrum

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.