Lesson plan

Plus sizing

Plus sizing is the practice of replacing an automotive wheel with one of a larger diameter fitted with a new tire of lower aspect ratio so that the new tire has close to the same diameter and circumference as the original tire to minimize any changes in speedometer accuracy, torque and traction control, while reducing sidewall flex and (generally) increasing cornering ability. The number following the "plus" describes the number of inches which is added to the diameter of the rim. For example, plus one sizing means increasing the wheel by – i.e. from a rim size. A "plus zero" upgrade means changing to a wider tire size while using the same diameter wheel. Changing to a wider tire requires reducing the aspect ratio (the second number in the sequence of numbers that describes the tire's size). Since the aspect ratio is a percentage which is used to calculate the height of the tire's sidewall, it follows that if a larger number is used for the width, a smaller number must be substituted if the final result is to remain the same—which is the objective of Plus sizing.

Back to article

Article summary

Plus sizing is the practice of replacing an automotive wheel with one of a larger diameter fitted with a new tire of lower aspect ratio so that the new tire has close to the same diameter and circumference as the original tire to minimize any changes in speedometer accuracy, torque and traction control, while reducing sidewall flex and (generally) increasing cornering ability. The number following the "plus" describes the number of inches which is added to the diameter of the rim. For example, plus one sizing means increasing the wheel by – i.e. from a rim size. A "plus zero" upgrade means changing to a wider tire size while using the same diameter wheel. Changing to a wider tire requires reducing the aspect ratio (the second number in the sequence of numbers that describes the tire's size). Since the aspect ratio is a percentage which is used to calculate the height of the tire's sidewall, it follows that if a larger number is used for the width, a smaller number must be substituted if the final result is to remain the same—which is the objective of Plus sizing.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.