Lesson plan
Plutonium borides
groups shown red with plutonium atoms shown blue at cubical vertices; bonding depiction is naïve) Several plutonium borides can be formed by direct combination of plutonium and boron powders in an inert atmosphere at reduced pressure. PuB was reported to form at 1200 °C with a range of 40–70% boron. It supposedly has a Pu-B bond length of 2.46 Å and the NaCl structure, as do TiB, ZrB and HfB. The existence of PuB was contested later based on several arguments. PuB 2 is formed at 800 °C and has a similar structure to most other metal diborides. At 1200 °C with 70–85% boron, mixtures of PuB 4 and PuB 6 are formed, with more of the latter as the temperature increases; PuB 4 has the tetragonal structure (same as UB 4 ), and PuB 6 has cubic structure, same as all hexaborides (CaB 6 , LaB 6 etc.). The most remarkable plutonium boride is arguably PuB 66 , previously misidentified as PuB 100 . Its existence demonstrates the importance of contamination in boride research because as little as 1% of an impurity is capable of changing its crystal structure.
Article summary
groups shown red with plutonium atoms shown blue at cubical vertices; bonding depiction is naïve) Several plutonium borides can be formed by direct combination of plutonium and boron powders in an inert atmosphere at reduced pressure. PuB was reported to form at 1200 °C with a range of 40–70% boron. It supposedly has a Pu-B bond length of 2.46 Å and the NaCl structure, as do TiB, ZrB and HfB. The existence of PuB was contested later based on several arguments. PuB 2 is formed at 800 °C and has a similar structure to most other metal diborides. At 1200 °C with 70–85% boron, mixtures of PuB 4 and PuB 6 are formed, with more of the latter as the temperature increases; PuB 4 has the tetragonal structure (same as UB 4 ), and PuB 6 has cubic structure, same as all hexaborides (CaB 6 , LaB 6 etc.). The most remarkable plutonium boride is arguably PuB 66 , previously misidentified as PuB 100 . Its existence demonstrates the importance of contamination in boride research because as little as 1% of an impurity is capable of changing its crystal structure.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.