Polarization (waves)
, or , is a property of transverse waves which specifies the geometrical orientation of the oscillations.
≈ 12 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
, or , is a property of transverse waves which specifies the geometrical orientation of the oscillations. In a transverse wave, the direction of the oscillation is perpendicular to the direction of motion of the wave. One example of a polarized transverse wave is vibrations traveling along a taut string, for example, in a musical instrument like a guitar string.
Depending on how the string is plucked, the vibrations can be in a vertical direction, in a horizontal direction, or any direction in between. In contrast, in longitudinal waves, such as sound waves in a liquid or gas, the displacement of the particles in the oscillation is always in the direction of propagation, so these waves do not exhibit polarization.
Transverse waves that exhibit polarization include electromagnetic waves such as light and radio waves, gravitational waves, and transverse sound waves (shear waves) in solids. An electromagnetic wave such as light consists of a coupled oscillating electric field and magnetic field that are always perpendicular to each other.
Different states of polarization correspond to different relationships between the directions of the fields and the direction of propagation. In linear polarization, the electric and magnetic fields each oscillate in a single direction, perpendicular to one another.…
, or , is a property of transverse waves which specifies the geometrical orientation of the oscillations. In a transverse wave, the direction of the oscillation is perpendicular to the direction of motion of the wave. One example of a polarized transverse wave is vibrations traveling along a taut string, for example, in a musical instrument like a guitar string.
Depending on how the string is plucked, the vibrations can be in a vertical direction, in a horizontal direction, or any direction in between. In contrast, in longitudinal waves, such as sound waves in a liquid or gas, the displacement of the particles in the oscillation is always in the direction of propagation, so these waves do not exhibit polarization.
Transverse waves that exhibit polarization include electromagnetic waves such as light and radio waves, gravitational waves, and transverse sound waves (shear waves) in solids. An electromagnetic wave such as light consists of a coupled oscillating electric field and magnetic field that are always perpendicular to each other.
Different states of polarization correspond to different relationships between the directions of the fields and the direction of propagation. In linear polarization, the electric and magnetic fields each oscillate in a single direction, perpendicular to one another. In circular or elliptical polarization, the fields rotate around the beam's direction of travel at a constant rate.
The rotation can be either in the right-hand or in the left-hand direction. Light or other electromagnetic radiation from many sources, such as the sun, flames, and incandescent lamps, consists of short wave trains with an equal mixture of polarizations; this is called unpolarized light.
Passing unpolarized light through a polarizer, which allows waves of only one polarization to pass through, yields polarized light. The most common optical materials do not affect the polarization of light, but some materials—those that exhibit birefringence, dichroism, or optical activity—affect light differently depending on its polarization.
Some of these are used to make polarizing filters. Light also becomes partially polarized when it reflects at an angle from a surface. According to quantum mechanics, electromagnetic waves can also be viewed as streams of particles called photons.
When viewed in this way, the polarization of an electromagnetic wave is determined by a quantum mechanical property of photons called their spin. A photon has one of two possible spins: it can either spin in a right hand sense or a left hand sense about its direction of travel.
Circularly polarized electromagnetic waves are composed of photons with only one type of spin, either right- or left-hand. Linearly polarized waves consist of photons that are in a superposition of right and left circularly polarized states, with equal amplitude and phases synchronized to give oscillation in a plane.
Polarization is an important parameter in areas of science dealing with transverse waves, such as optics, seismology, radio, and microwaves. Especially impacted are technologies such as lasers, wireless and optical fiber telecommunications, and radar. \vec{E}(z, t) = \begin{bmatrix} e_x \\ e_y \\ 0 \end{bmatrix}\; e^{i2\pi \left(\frac{z}{\lambda} - \frac{t}{T}\right)} = \begin{bmatrix} e_x \\ e_y \\ 0 \end{bmatrix}\; e^{i(kz - \omega t)} and \vec{H}(z, t) = \begin{bmatrix} h_x \\ h_y \\ 0 \end{bmatrix}\; e^{i2\pi \left(\frac{z}{\lambda} - \frac{t}{T}\right)} = \begin{bmatrix} h_x \\ h_y \\ 0 \end{bmatrix}\; e^{i(kz - \omega t)}, where is the wavelength (whose refractive index is ) and is the period of the wave.
Here , , , and are complex numbers. In the second more compact form, as these equations are customarily expressed, these factors are described using the wavenumber and angular frequency (or "radian frequency") .
In a more general formulation with propagation restricted to the direction, then the spatial dependence is replaced by where is called the wave vector, the magnitude of which is the wavenumber. Thus the leading vectors and each contain up to two nonzero (complex) components describing the amplitude and phase of the wave's and polarization components (again, there can be no polarization component for a transverse wave in the direction).
For a given medium with a characteristic impedance , is related to by: \begin{align} h_y &= \frac{e_x}{\eta} \\ h_x &= -\frac{e_y}{\eta}. \end{align} In a dielectric, is real and has the value , where is the refractive index and is the impedance of free space. The impedance will be complex in a conducting medium.
Note that given that relationship, the dot product of and must be zero: \begin{align} \vec{E}\left(\vec{r}, t\right) \cdot \vec{H}\left(\vec{r}, t\right) &= e_x h_x + e_y h_y + e_z h_z \\ &= e_x \left(-\frac{e_y}{\eta}\right) + e_y \left(\frac{e_x}{\eta}\right) + 0 \cdot 0 \\ &= 0, \end{align} indicating that these vectors are orthogonal (at right angles to each other), as expected. Knowing the propagation direction ( in this case) and , one can just as well specify the wave in terms of just and describing the electric field.
The vector containing and (but without the component which is necessarily zero for a transverse wave) is known as a Jones vector. In addition to specifying the polarization state of the wave, a general Jones vector also specifies the overall magnitude and phase of that wave.
Specifically, the intensity of the light wave is proportional to the sum of the squared magnitudes of the two electric field components: I = \left(\left|e_x\right|^2 + \left|e_y\right|^2\right) \, \frac{1}{2\eta} However, the wave's state of polarization is only dependent on the (complex) ratio of to . So let us just consider waves whose ; this happens to correspond to an intensity of about in free space (where ).
And because the absolute phase of a wave is unimportant in discussing its polarization state, let us stipulate that the phase of is zero; in other words is a real number while may be complex. Under these restrictions, and can be represented as follows: \begin{align} e_x &= \sqrt{\frac{1 + Q}{2}} \\ e_y &= \sqrt{\frac{1 - Q}{2}}\, e^{i\phi}, \end{align} where the polarization state is now fully parameterized by the value of (such that ) and the relative phase .
Now if one were to introduce a phase shift in between those horizontal and vertical polarization components, one would generally obtain elliptical polarization as is shown in the third figure. When the phase shift is exactly ±90°, and the amplitudes are the same, then circular polarization is produced (fourth and fifth figures).
Circular polarization can be created by sending linearly polarized light through a quarter-wave plate oriented at 45° to the linear polarization to create two components of the same amplitude with the required phase shift. The superposition of the original and phase-shifted components causes a rotating electric field vector, which is depicted in the animation on the right.
Note that circular or elliptical polarization can involve either a clockwise or counterclockwise rotation of the field, depending on the relative phases of the components. These correspond to distinct polarization states, such as the two circular polarizations shown above. The orientation of the and axes used in this description is arbitrary.
The choice of such a coordinate system and viewing the polarization ellipse in terms of the and polarization components, corresponds to the definition of the Jones vector (below) in terms of those basis polarizations. Axes are selected to suit a particular problem, such as being in the plane of incidence.
Since there are separate reflection coefficients for the linear polarizations in and orthogonal to the plane of incidence (p and s polarizations, see below), that choice greatly simplifies the calculation of a wave's reflection from a surface. Any pair of orthogonal polarization states may be used as basis functions, not just linear polarizations.
For instance, choosing right and left circular polarizations as basis functions simplifies the solution of problems involving circular birefringence (optical activity) or circular dichroism. A polarization state can then be described in relation to the geometrical parameters of the ellipse, and its "handedness", that is, whether the rotation around the ellipse is clockwise or counter clockwise.
One parameterization of the elliptical figure specifies the orientation angle , defined as the angle between the major axis of the ellipse and the -axis along with the ellipticity , the ratio of the ellipse's major to minor axis. (also known as the axial ratio).
The ellipticity parameter is an alternative parameterization of an ellipse's eccentricity e=\sqrt{1 - b^2/a^2}, or the ellipticity angle, \chi=\arctan b/a =\arctan 1/\varepsilon as is shown in the figure. The angle is also significant in that the latitude (angle from the equator) of the polarization state as represented on the Poincaré sphere (see below) is equal to .
The special cases of linear and circular polarization correspond to an ellipticity of infinity and unity (or of zero and 45°) respectively. \mathbf{e} = \begin{bmatrix} a_1 e^{i\theta_1} \\ a_2 e^{i\theta_2} \end{bmatrix}. Here and denote the amplitude of the wave in the two components of the electric field vector, while and represent the phases.
The product of a Jones vector with a complex number of unit modulus gives a different Jones vector representing the same ellipse, and thus the same state of polarization. The physical electric field, as the real part of the Jones vector, would be altered but the polarization state itself is independent of absolute phase.
The basis vectors used to represent the Jones vector need not represent linear polarization states (i.e. be real). In general any two orthogonal states can be used, where an orthogonal vector pair is formally defined as one having a zero inner product.
A common choice is left and right circular polarizations, for example to model the different propagation of waves in two such components in circularly birefringent media (see below) or signal paths of coherent detectors sensitive to circular polarization. \mathbf{e}(z + \Delta z, t + \Delta t) = \mathbf{e}(z, t) e^{ik (c\Delta t - \Delta z)}, where is the wavenumber. As noted above, the instantaneous electric field is the real part of the product of the Jones vector times the phase factor When an electromagnetic wave interacts with matter, its propagation is altered according to the material's (complex) index of refraction.
When the real or imaginary part of that refractive index is dependent on the polarization state of a wave, properties known as birefringence and polarization dichroism (or diattenuation) respectively, then the polarization state of a wave will generally be altered. In such media, an electromagnetic wave with any given state of polarization may be decomposed into two orthogonally polarized components that encounter different propagation constants.
The effect of propagation over a given path on those two components is most easily characterized in the form of a complex transformation matrix known as a Jones matrix: \mathbf{e'} = \mathbf{J}\mathbf{e}. The Jones matrix due to passage through a transparent material is dependent on the propagation distance as well as the birefringence.
The birefringence (as well as the average refractive index) will generally be dispersive, that is, it will vary as a function of optical frequency (wavelength). In the case of non-birefringent materials, however, the Jones matrix is the identity matrix (multiplied by a scalar phase factor and attenuation factor), implying no change in polarization during propagation.
For propagation effects in two orthogonal modes, the Jones matrix can be written as \mathbf{J} = \mathbf{T}\begin{bmatrix} g_1 & 0 \\ 0 & g_2 \end{bmatrix}\mathbf{T}^{-1}, where and are complex numbers describing the phase delay and possibly the amplitude attenuation due to propagation in each of the two polarization eigenmodes. is a unitary matrix representing a change of basis from these propagation modes to the linear system used for the Jones vectors; in the case of linear birefringence or diattenuation the modes are themselves linear polarization states so and can be omitted if the coordinate axes have been chosen appropriately. Animations of Linear, Circular and Elliptical Polarizations on YouTube Polarization and Waveplate Simulator, ephotonics
Text derived from https://en.wikipedia.org/w/index.php?oldid=1377596512 under CC BY-SA 4.0; modifications have been made.