Poly(methyl methacrylate)
: high-voltage dielectric breakdown in an acrylic polymer block Poly(methyl methacrylate) (PMMA) is a synthetic polymer derived from methyl methacrylate.
≈ 4 min read
Poly(methyl methacrylate). encyclopegia.org, snapshot enwiki-001378742053. /a/poly-methyl-methacrylate
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
high-voltage dielectric breakdown in an acrylic polymer block Poly(methyl methacrylate) (PMMA) is a synthetic polymer derived from methyl methacrylate. It is a transparent thermoplastic used as an engineering plastic.
PMMA is also known as acrylic and acrylic glass and by the trade names and brands Crylux, Walcast, Wanjiale, Hesalite, Plexiglas, Acrylite, Lucite, PerClax, and Perspex, among several others (see below). This plastic is often used in sheet form as a lightweight or shatter-resistant alternative to glass.
It can also be used as a casting resin, in inks and coatings, and for many other purposes. It is technically classified as a type of glass in the sense that it is a non-crystalline vitreous substance, hence the common name of acrylic glass.
History
The first acrylic acid was created in 1843. Methacrylic acid, derived from acrylic acid, was formulated in 1865. The reaction between methacrylic acid and methanol results in the ester methyl methacrylate.
It was developed in 1928 in several different laboratories by many chemists, such as William R. Conn, Otto Röhm, and Walter Bauer, and first brought to market in 1933 by the German company Röhm & Haas AG (as of January 2019, part of Evonik Industries) and its partner and former U.S. affiliate Rohm and Haas Company under the trademark Plexiglas. Polymethyl methacrylate was discovered in the early 1930s by British chemists Rowland Hill and John Crawford at Imperial Chemical Industries (ICI) in the United Kingdom.
ICI registered the product under the trademark Perspex. About the same time, chemist and industrialist Otto Röhm of Röhm and Haas AG in Germany attempted to produce safety glass by polymerizing methyl methacrylate between two layers of glass. The polymer separated from the glass as a clear plastic sheet, which Röhm gave the trademarked name Plexiglas in 1933.
Both Perspex and Plexiglas were commercialized in the late 1930s. In the United States, E.I. du Pont de Nemours & Company subsequently introduced its own product under the trademark Lucite. In 1936, ICI Acrylics began the first commercially viable production of acrylic safety glass.
During World War II, both Allied and Axis forces used acrylic glass for submarine periscopes and aircraft windscreen, canopies, and gun turrets. Scraps of acrylic were also used to make clear pistol grips for the M1911A1 pistol or clear handle grips for the M1 bayonet or theater knives so that soldiers could put small photos of loved ones or pin-up girls' pictures inside.
They were called "Sweetheart Grips" or "Pin-up Grips". Others were used to make handles for theater knives made from scrap materials. Civilian applications followed after the war.
Cast acrylic
Cast acrylic is a form of PMMA that is formed by casting the monomer methyl methacrylate, mixed with initiators and possibly other additives, into a form or mold. Sheet and rod stock are created by casting into static forms, while tubing is produced in rotational molds.
Extruded acrylic
Extruded acrylic is formed in a continuous process from solid acrylic pellets, which are heated, mixed, and forced through forming dies followed by polished rollers. The polymer chains cannot be much longer than the pellets from which they were formed. Chain length results in important differences between cast and extruded acrylic.
Cast acrylic has better thermal stability, higher resistance to crazing when exposed to solvents, and wider thermo-forming range than extruded acrylic. Cast acrylic has a better ability to be reworked hot and it is known for its superior surface finish and optical properties. Cast acrylic is also more scratch-resistant than extruded acrylic.
Cast acrylic is preferred over extruded acrylic in applications that require machining, such as turning on lathes, milling, or drilling. Extruded acrylic, which has less thermal stability, tends to melt and clog cutting tools.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1378742053 under CC BY-SA 4.0; modifications have been made.