Polyanhydride
Polyanhydrides are a class of biodegradable polymers characterized by anhydride bonds that connect repeat units of the polymer backbone chain.
≈ 5 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Polyanhydrides are a class of biodegradable polymers characterized by anhydride bonds that connect repeat units of the polymer backbone chain. Their main application is in the medical device and pharmaceutical industry. In vivo, polyanhydrides degrade into non-toxic diacid monomers that can be metabolized and eliminated from the body. Owing to their safe degradation products, polyanhydrides are considered to be biocompatible.
Synthesis and characterization
Polyanhydrides are synthesized using either melt condensation or solution polymerization. Depending on the synthesis method used, various characteristics of polyanhydrides can be altered to achieve the desired product. Characterization of polyanhydrides determines the structure, composition, molecular weight, and thermal properties of the molecule. These properties are determined by using various light-scattering and size-exclusion methods.
Polymerization
Polyanhydrides can be easily prepared by using available, low cost resources. The process can be varied to achieve desirable characteristics. Traditionally, polyanhydrides have been prepared by melt condensation polymerization, which results in high molecular weight polymers.
Melt condensation polymerization involves reacting dicarboxylic acid monomers with excess acetic anhydride at a high temperature and under a vacuum to form the polymers. Catalysts may be used to achieve higher molecular weights and shorter reaction times. Generally, a one-step synthesis (method involving only one reaction) is used which does not require purification.
There are many other methods used to synthesize polyanhydrides. Some of the other methods include: microwave heating, high-throughput synthesis (synthesis of polymers in parallel), ring opening polymerization (removal of cyclic monomers), interfacial condensation (high temperature reaction of two monomers), dehydrative coupling agents (removing the water group from two carboxyl groups), and solution polymerization (reacting in a solution).
Chemical structure and composition analysis
The chemical structure and composition of polyanhydrides can be determined using nuclear magnetic resonance (NMR) spectroscopy. The positions of peaks in proton NMR spectroscopy are determined by the class of polanhydride (aromatic, aliphatic, or unsaturated), and so provide information regarding structural features of the polymer, including whether a copolymer has a random or block-like structure.
Molecular weight and degradation rate can also determined by spectroscopically.
Molecular weight analysis
Aside from using NMR to determine a polyanhydride’s molecular weight, gel permeation chromatography (GPC), and viscosity measurements may also be used.
Thermal properties
Differential scanning calorimetry (DSC) is used to determine the thermal properties of polyanhydrides. Glass transition temperature, melting temperature, and heat of fusion can all be determined by DSC. Crystallinity of a polyanhydride can be determined using DSC, Small angle X-ray scattering (SAXS), Nuclear magnetic resonance (NMR), and X-ray diffraction.
Degradation
The erosion and degradation of a polymer describe how the polymer physically loses mass (degrades). The two common erosion mechanisms are surface and bulk erosion. Polyanhydrides are surface eroding polymers.
Surface eroding polymers do not allow water to penetrate into the material. They erode layer by layer, like a lollipop. The hydrophobic backbone with hydrolytically labile anhydride linkages allows hydrolytic degradation to be controlled by manipulating the polymer composition.
This manipulation can occur by adding a hydrophilic group to the polyanhydride to make a copolymer. Polyanhydride copolymers with hydrophilic groups exhibit bulk eroding characteristics. Bulk eroding polymers take in water like a sponge (throughout the material) and erode inside and on the surface of the polymer.
Drug release from bulk eroding polymers is difficult to characterize because the primary mode of release from these polymers is diffusion. Unlike surface eroding polymers, bulk eroding polymers show a very weak relationship between the rate of polymer degradation and the rate of drug release.
Therefore, the development of surface eroding polyanhydrides incorporated into the bulk eroding polymers is of increased importance.
Biocompatibility
Biocompatibility and toxicity of a polymeric material is evaluated by examining systemic toxic responses, local tissue responses, carcinogenic and mutagenic responses, and allergic responses to the material's degradation products. Animal studies are conducted to test the polymer’s effect on each of these negative responses.
Polyanhydrides and their degradation products have not been found to cause significant harmful responses and are considered to be biocompatible.
References
Domb, A., Amselem, S., Langer, R., and Manair, M. “Chapter 3: Polyanhydrides as Carriers of Drugs.” Biomedical Polymers Designed –to –Degrade Systems. Hanser Publishers: Munich, Vienna, NY, 1994.
Kumar, N., Langer, R., and Domb, A. “Polyanhydrides: an overview.” Advanced Drug Delivery Reviews, 2002. “Polyanhydride Synthesis Techniques.”
Wyatt Technology Corp. Tamada, J. and Langer, R. “The development of polyanhydrides for drug delivery applications.” Journal of Biomaterials Science, Polymer Ed. Vol. 3, No. 4, pp. 315–353, 1992. Torres, M. P.; Determan, A. S.; Malapragada, S. K.; Narasimhan, B. “Polyanhydrides.”
Encyclopedia of Chemical Processing. 2006. B.M. Vogel, S.K. Mallapragada, and B. Narasimhan, “Rapid Synthesis of Polyanhydrides By Microwave Polymerization”, Macromolecular Rapid Communications 25, 330-333, 2004.
B.M. Vogel, S.K. Mallapragada, “Synthesis of Novel Biodegradable Polyanhydrides Containing Aromatic and Glycol Functionality for Tailoring of Hydrophilicity in Controlled Drug Delivery Devices”, Biomaterials, 26, 721-728, 2004. B.M. Vogel, Naomi Eidelman, S.K. Mallapragada and B. Narasimhan, “Parallel Synthesis and Dissolution Testing of Polyanhydride Random Copolymers”, Journal of Combinatorial Chemistry, 7, 921-928, 2005.
B.M. Vogel and S.K. Mallapragada, “The Synthesis of Polyanhydrides”, in Handbook of Biodegradable Materials and their Applications, edited by S.K. Mallapragada and Balaji Narasimhan, ASP Publishers, Vol. 1, 1-19, 2005. P.Guruprasad Reddy and A.J.Domb, “Polyanhydride Chemistry”. Biomacromolecules, 2022, 23(12), 4959-4984. doi: 10.1021/acs.biomac.2c01180.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1250275476 under CC BY-SA 4.0; modifications have been made.