Lesson plan

Polyetherimide

build plate on a Bambu Lab A1 mini FFF 3D printer Polyetherimide (PEI; branded as Ultem ) is an amorphous, amber-to-transparent thermoplastic with characteristics similar to the related plastic PEEK. When comparing PEI to PEEK, the former is cheaper but has lower impact strength and a tighter temperature range. PEI plastics were first introduced into the market by General Electric (GE) in 1982 under the trade name Ultem resulting from the work of J.G. Wirth's research team in the early 1970s. Due to its adhesive properties and chemical stability it became a popular bed material for FFF 3D printers.

Back to article

Article summary

build plate on a Bambu Lab A1 mini FFF 3D printer Polyetherimide (PEI; branded as Ultem ) is an amorphous, amber-to-transparent thermoplastic with characteristics similar to the related plastic PEEK. When comparing PEI to PEEK, the former is cheaper but has lower impact strength and a tighter temperature range. PEI plastics were first introduced into the market by General Electric (GE) in 1982 under the trade name Ultem resulting from the work of J.G. Wirth's research team in the early 1970s. Due to its adhesive properties and chemical stability it became a popular bed material for FFF 3D printers.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.