{
  "id": "polyimide-017607-fd56e421419195ea",
  "slug": "polyimide",
  "title": "polyimide",
  "qid": "Q145958",
  "lead": "Polyimide (sometimes abbreviated PI) is a polymer containing imide groups belonging to the class of high-performance plastics. With their high heat-resistance, polyimides enjoy diverse applications in roles demanding rugged organic materials, such as high temperature fuel cells, displays, and various military roles. A classic polyimide is Kapton, which is produced by condensation of pyromellitic dianhydride and 4,4'-oxydianiline.",
  "body": "Polyimide (sometimes abbreviated PI) is a polymer containing imide groups belonging to the class of high-performance plastics. With their high heat-resistance, polyimides enjoy diverse applications in roles demanding rugged organic materials, such as high temperature fuel cells, displays, and various military roles. A classic polyimide is Kapton, which is produced by condensation of pyromellitic dianhydride and 4,4'-oxydianiline. ==History== The first polyimide was discovered in 1907 by Bogart and Renshaw. They found that 4-amino phthalic anhydride does not melt when heated but does release water upon the formation of a high molecular weight polyimide. The first semialiphatic polyimide was prepared by Edward and Robinson by melt fusion of diamines and tetra acids or diamines and diacids/diester. However, the first polyimide of significant commercial importance—Kapton—was pioneered in the 1950s by workers at DuPont who developed a successful route for synthesis of high molecular weight polyimide involving a soluble polymer precursor. Up to today this route continues being the primary route for the production of most polyimides. Polyimides have been in mass production since 1955. The field of polyimides is covered by various extensive books and review articles. ==Classification== According to the composition of their main chain, polyimides can be: Aliphatic, Semi-aromatic (also referred to as alipharomatic), Aromatic: these are the most used polyimides because of their thermostability. According to the type of interactions between the main chains, polyimides can be: Thermoplastic: very often called pseudothermoplastic. Thermosetting: commercially available as uncured resins, polyimide solutions, stock shapes, thin sheets, laminates and machined parts. ==Synthesis== Several methods are possible to prepare polyimides, among them: The reaction between a dianhydride and a diamine (the most used method). The reaction between a dianhydride and a diisocyanate. The polymerization of a diamine and a dianhydride can be carried out by a two-step method in which a poly(amidocarboxylic acid) is prepared first, or directly by a one-step method. The two-step method is the most widely used procedure for polyimide synthesis. First a soluble poly(amidocarboxylic acid) (2) is prepared which is cyclized after further processing in a second step to the polyimide (3). A two-step process is necessary because the final polyimides are in most cases infusible and insoluble due to their aromatic structure. Dianhydrides used as precursors to these materials include pyromellitic dianhydride, benzoquinonetetracarboxylic dianhydride and naphthalene tetracarboxylic dianhydride. Common diamine building blocks include 4,4'-diaminodiphenyl ether (DAPE), meta-phenylenediamine (MDA) and 3,3'-diaminodiphenylmethane. Hundreds of diamines and dianhydrides have been examined to tune the physical and especially the processing properties of these materials. These materials tend to be insoluble and have high softening temperatures, arising from charge-transfer interactions between the planar subunits. ===Analysis=== The imidization reaction can be followed via IR spectroscopy. The IR spectrum is characterized during the reaction by the disappearance of absorption bands of the poly(amic acid) at 3400 to 2700&nbsp;cm −1 (OH stretch), ~1720 and 1660 (amide C=O) and ~1535&nbsp;cm −1 (C-N stretch). At the same time, the appearance of the characteristic imide bands can be observed, at ~1780 (C=O asymm), ~1720 (C=O symm), ~1360 (C-N stretch) and ~1160 and 745&nbsp;cm −1 (imide ring deformation). ⁠ Detailed analyses of polyimide and carbonized polyimide and graphitized polyimide have been reported. ==Properties== Thermosetting polyimides are known for thermal stability, good chemical resistance, excellent mechanical properties, and characteristic orange/yellow color. Polyimides compounded with graphite or glass fiber reinforcements have flexural strengths of up to and flexural moduli of . Thermoset polymer matrix polyimides exhibit very low creep and high tensile strength. These properties are maintained during continuous use to temperatures of up to and for short excursions, as high as . Molded polyimide parts and laminates have very good heat resistance. Normal operating temperatures for such parts and laminates range from cryogenic to those exceeding . Polyimides are also inherently resistant to flame combustion and do not usually need to be mixed with flame retardants. Most carry a UL rating of VTM-0. Polyimide laminates have a flexural strength half life at of 400 hours. Typical polyimide parts are not affected by commonly used solvents and oils – including hydrocarbons, esters, ethers, alcohols and freons. They also resist weak acids but are not recommended for use in environments that contain alkalis or inorganic acids. Some polyimides, such as CP1 and CORIN XLS, are solvent-soluble and exhibit high optical clarity. The solubility properties lend them towards spray and low temperature cure applications. ==Applications== s made of Kapton foil, thickness approx. 0.05&nbsp;mm === Insulation and passivation films=== Polyimide materials are lightweight, flexible, and resistant to heat and chemicals. Therefore, they are used in the electronics industry for flexible cables and as an insulating film on magnet wire. For example, in a laptop computer, the cable that connects the main logic board to the display (which must flex every time the laptop is opened or closed) is often a polyimide base with copper conductors. Examples of polyimide films include Apical, Kapton, UPILEX, Zenimid, VTEC PI, Norton TH and Kaptrex. Polyimide is used to coat optical fibers for medical or high temperature applications. An additional use of polyimide resin is as an insulating and passivation layer in the manufacture of Integrated circuits and MEMS chips. The polyimide layers have good mechanical elongation and tensile strength, which also helps the adhesion between the polyimide layers or between polyimide layer and deposited metal layer. The minimum interaction between the gold film and the polyimide film, coupled with high temperature stability of the polyimide film, results in a system that provides reliable insulation when subjected to various types of environmental stresses. Polyimide is also used as a substrate for cellphone antennas. Multi-layer insulation used on spacecraft is usually made of polyimide coated with thin layers of aluminum, silver, gold, or germanium. The gold-colored material often seen on the outside of spacecraft is typically actually single aluminized polyimide, with the single layer of aluminum facing in. The yellowish-brown polyimide gives the surface its gold-like color. ==See also== ==References== ==Further reading== Modern Plastic Mid-October Encyclopedia Issue, Polyimide, thermoset, p.&nbsp;146. Varun Ratta: POLYIMIDES: Chemistry & structure-property relationships – literature review (Chapter 1). ==External links== Material Property Database, MIT",
  "categories": [
    "10639794",
    "10639920",
    "22905763",
    "23118434",
    "23603337",
    "27224842",
    "29296446",
    "30408071",
    "40974111",
    "42861950"
  ],
  "license": "CC BY-SA 4.0",
  "source_uri": "https://en.wikipedia.org/w/index.php?oldid=1371419506",
  "content_hash": "fd56e421419195ea6bb94817b2276ca771c4acca6b96b46c7ce292e6f343cf2a",
  "created_at": 1792308457.6501899,
  "updated_at": 1787728229.0,
  "claims": [],
  "contradictions": [],
  "confidence": 0.6,
  "csl": {
    "id": "polyimide-017607-fd56e421419195ea",
    "type": "webpage",
    "title": "polyimide",
    "author": [
      {
        "family": "Anticloud FZ LLE",
        "literal": "Anticloud FZ LLE"
      }
    ],
    "container-title": "encyclopegia.org",
    "publisher": "Anticloud FZ LLE",
    "publisher-place": "Dubai, United Arab Emirates",
    "URL": "https://encyclopegia.org/a/polyimide",
    "issued": {
      "date-parts": [
        [
          2026,
          10,
          18
        ]
      ]
    },
    "accessed": {
      "date-parts": [
        [
          2026,
          11,
          20
        ]
      ]
    },
    "license": "CC BY-SA 4.0",
    "DOI": "eo1:polyimide-017607-fd56e421419195ea",
    "isBasedOn": "https://en.wikipedia.org/w/index.php?oldid=1371419506",
    "note": "Immutable snapshot polyimide-017607-fd56e421419195ea, content root fd56e421419195ea…"
  }
}