Polylactic acid
Polylactic acid, also known as poly(lactic acid) or polylactide (PLA), is a plastic material.
≈ 3 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Polylactic acid, also known as poly(lactic acid) or polylactide (PLA), is a plastic material. As a thermoplastic polyester (or polyhydroxyalkanoate) it has the backbone formula or . PLA is formally obtained by condensation of lactic acid with loss of water (hence its name).
It can also be prepared by ring-opening polymerization of lactide , the cyclic dimer of the basic repeating unit. Often PLA is blended with other polymers. PLA can be biodegradable or long-lasting, depending on the manufacturing process, additives and copolymers.
PLA is economically produced from renewable resources and can be used in compostable products. In 2022, PLA had the highest consumption volume of any bioplastic of the world, with a share of ca. 26% of total bioplastic demand.
PLA is the most widely used plastic filament material in FDM 3D printing, due to its low melting point, high strength, low thermal expansion, and good layer adhesion, although it possesses poor heat resistance unless annealed. Although the name "polylactic acid" is widely used, it does not comply with IUPAC standard nomenclature, which is "poly(lactic acid)".
The name "polylactic acid" is potentially ambiguous or confusing, because PLA is not a polyacid, such as a polymer with free carboxylic acid in each monomer, but rather a polyester. File:Mulch Film made of PLA-Blend Bio-Flex.jpg|Mulch film made of PLA-blend "bio-flex" File:Cmglee PLA cups.jpg|Biodegradable PLA cups File:Teebeutel Polylactid 2009.jpg|Tea bags made of PLA.
Peppermint tea is enclosed. File:3D printing of PLA-CNT microcoil.webm|3D printing of a microcoil using a conductive mixture of polylactide and carbon nanotubes. File:3D Printed Macrognathism.jpg|3D printed human skull with data from computed tomography.
Transparent PLA.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1376587580 under CC BY-SA 4.0; modifications have been made.