Polymer scattering
Polymer scattering experiments are one of the main scientific methods used in chemistry, physics and other sciences to study the characteristics of polymeric systems: solutions, gels, compounds and more.
≈ 4 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Polymer scattering experiments are one of the main scientific methods used in chemistry, physics and other sciences to study the characteristics of polymeric systems: solutions, gels, compounds and more. As in most scattering experiments, it involves subjecting a polymeric sample to incident particles (with defined wavelengths), and studying the characteristics of the scattered particles: angular distribution, intensity polarization and so on.
This method is quite simple and straightforward, and does not require special manipulations of the samples which may alter their properties, and hence compromise exact results. As opposed to crystallographic scattering experiments, where the scatterer or "target" has very distinct order, which leads to well defined patterns (presenting Bragg peaks for example), the stochastic nature of polymer configurations and deformations (especially in a solution), gives rise to quite different results.
We consider a polymer as a chain of monomers, each with its position vector \vec{R_i} and scattering amplitude a_i . For simplicity, it is worthwhile considering identical monomers in the chain, such that all a_i=a . An incoming ray (of light/neutrons/X-ray etc.) has a wave vector (or momentum) \vec{k}_{incident} , and is scattered by the polymer to the vector \vec{k}_{final} . This enables us to define the scattering vector \vec{k}\equiv\vec{k}_{final}-\vec{k}_{incident} .
By coherently summing the contributions of all N monomers, we get the scattering intensity from a single polymer, as a function of \vec{k} : I(\vec{k})=|a|^2\sum_{i,j=1}^N e^{i\vec{k}\cdot(\vec{R}_i-\vec{R}_j)} S(\vec{k})=\frac1{N^2}\langle \sum_{i,j=1}^N e^{i\vec{k}\cdot(\vec{R}_i-\vec{R}_j)}\rangle with \langle \cdot\rangle representing the ensemble average. This reduces to the following for an isotropic system (which is typically the case): S(\vec{k})=\frac1{N^2}\langle \sum_{i,j=1}^N \frac{\sin kR_{ij}}{kR_{ij}} \rangle where two more definitions were made: k\equiv|\vec k| and R_{ij}\equiv|\vec R_i-\vec R_j| .
S_D(\vec{k})=\frac2{(kR_g)^4}[(kR_g)^2-1+e^{-(kR_g)^2}] With R_g being the polymer's radius of gyration. in many practical scenarios, the above formula is approximated by the (much more convenient) Lorentzian: S_D(\vec{k})\approx\frac1{1+\frac12(kR_g)^2} which has a relative error of no more than 15% compared to the exact expression. S(\vec{k})\approx\frac1{N^2}\langle \sum_{i,j=1}^N 1-\frac16(kR_{ij})^2 \rangle and by utilising the definition of the radius of gyration: S(\vec{k})\approx1-\frac13(kR_{g})^2\approx e^{-\frac13(kR_{g})^2} where the final transition utilises once again the small-angle approximation.
We can thus approximate the scattering intensity in the small-angle regime as: \log I(k)=-\frac13k^2R_g^2+const. and by plotting \log I(k) vs. k^2 , a so-called "Guinier plot", we may determine the radius of gyration from the slope of this linear curve. This measure is one of many examples of how scattering experiments of polymers can reveal basic properties of those polymer chains. k=\frac{4\pi}{\lambda} \sin{\frac\theta2} so the small-angle condition becomes \frac{R_g}{\lambda} \sin{\frac\theta2}\ll1 , determining the relevant angles. while typical R_g values for polymers range in 10-100 \overset{o}{A} .
This makes small-angle measurements in neutrons and X-rays a bit more tedious, as very small angles are needed, and the data in those angles is often "overpowered" by the \theta=0 spot emerging in usual scattering experiments. The problem is mitigated by conducting longer experiments with more exposure time, which allows the required data to "intensify".
One must take care though, as to not allow the prolonged exposure to high levels of radiation damage the polymers (which might be a real problem when considering biological polymer samples – proteins, for example). On the other hand, to resolve smaller polymers and structurals subtleties, one cannot always resort to using the long-wavelength rays, as the diffraction limit comes into play.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1350261004 under CC BY-SA 4.0; modifications have been made.