Lesson plan

Polymer solution casting

The polymer solution casting process utilizes a mandrel, or inner diameter mold, that is immersed in a tank of polymer solution or liquid plastic that has been specifically engineered for the process. Due to a combination of thermal and frictional properties, the polymer solution then forms a thin film around the mold. The mold is then extracted from the tank in a precisely controlled manner, followed by a curing or drying process. Once the first layer of thin film is appropriately solidified, secondary features can be added to the product such as braided or coiled wire, laser-cut hypotubes or engineered metal reinforcements to prevent kinking, or imaging targets specific to the intended medical application. Multiple casting steps can then be repeated to encapsulate the reinforcements, build up wall thickness, add additional lumens and optimize column strength. The part is then removed from the mold after it is cured or solidified. The most notable attribute of this thin-film process technology is the ability to alternate the material properties (i.e. strength, durometer, color, lubricity) amongst the individual layers or even down the length of the part, resulting in a feature-rich single-piece construction.…

Back to article

Article summary

The polymer solution casting process utilizes a mandrel, or inner diameter mold, that is immersed in a tank of polymer solution or liquid plastic that has been specifically engineered for the process. Due to a combination of thermal and frictional properties, the polymer solution then forms a thin film around the mold. The mold is then extracted from the tank in a precisely controlled manner, followed by a curing or drying process. Once the first layer of thin film is appropriately solidified, secondary features can be added to the product such as braided or coiled wire, laser-cut hypotubes or engineered metal reinforcements to prevent kinking, or imaging targets specific to the intended medical application. Multiple casting steps can then be repeated to encapsulate the reinforcements, build up wall thickness, add additional lumens and optimize column strength. The part is then removed from the mold after it is cured or solidified. The most notable attribute of this thin-film process technology is the ability to alternate the material properties (i.e. strength, durometer, color, lubricity) amongst the individual layers or even down the length of the part, resulting in a feature-rich single-piece construction.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.