Polymeric liquid crystal

Polymeric liquid crystals are similar to monomeric liquid crystals used in displays.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Polymeric liquid crystals are similar to monomeric liquid crystals used in displays. Both have dielectric anitroscopy, or the ability to change directions and absorb or transmit light depending on electric fields. Polymeric liquid crystals form long head-to-tail or side chain polymers, which are woven in thick mats and therefore have high viscosities.

The high viscosities allow the polymeric liquid crystals to be used in complex structures, but they are harder to align, limiting their usefulness. The polymerics align in microdomains facing all different directions, which ruins the optical effect. One solution to this is to mix in a small amount of photo-curing polymer, which when spin-coated onto a surface can be hardened.

Basically, the polymeric liquid crystal and photocurer are aligned in one direction, and then the photo curer is cured, "freezing" the polymeric in one direction.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1360729367 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001360729367 · captured 2026-06-23 · not yet sealed in the ledger · verify the chain · version history

Cite this page as: encyclopegia.org, “Polymeric liquid crystal”, snapshot enwiki-001360729367. https://encyclopegia.org/a/polymeric-liquid-crystal

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.