Polysilicon hydride

Polysilicon hydrides are polymers containing only silicon and hydrogen.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Polysilicon hydrides are polymers containing only silicon and hydrogen. They have the formula (SiH_{n})_{x} where 0.2 ≤ n ≤ 2.5 and x is the number of monomer units. The polysilicon hydrides are generally colorless or pale-yellow/ocher powders that are easily hydrolyzed and ignite readily in air. The surfaces of silicon prepared by MOCVD using silane (SiH 4 ) consist of a polysilicon hydride.

Polysilicon hydrides are polymers containing only silicon and hydrogen. They have the formula (SiH_{n})_{x} where 0.2 ≤ n ≤ 2.5 and x is the number of monomer units. The polysilicon hydrides are generally colorless or pale-yellow/ocher powders that are easily hydrolyzed and ignite readily in air. The surfaces of silicon prepared by MOCVD using silane (SiH 4 ) consist of a polysilicon hydride.

Synthesis

Polysilicon hydrides are much less thermally stable than the corresponding alkanes (C n H 2n+2 ). They are kinetically labile, with their decomposition reaction rate increasing with increases in the number of silicon atoms in the molecule. Consequently, the preparation and isolation of polysilicon hydrides is difficult for species containing more than a few silicon atoms.

Greater catenation of the Si atoms can be obtained with the halides (Si n X 2n+2 with n = 14) for the fluorides. Thus the polymeric silicon hydrides are formed along with smaller silicon hydride oligomers and hydrogen gas from the spontaneous but slow decomposition, as well as from the accelerated thermolysis, of acyclic and cyclic liquid silanes that are higher in molecular weight than monosilane (SiH 4 ) and disilane (Si 2 H 6 ).

Polysilicon hydrides are intermediates in the high-temperature conversion of mono- and disilane to silicon and hydrogen gas. In the following idealized sequence cyclopentasilane is the polysilicon hydride intermediate: 5 SiH 4 → Si 5 H 10 + 5 H 2 Si 5 H 10 → 5 Si + 5H 2 Polymeric silicon hydrides may be prepared by hydrolysis of certain silicides.

Acid hydrolysis of calcium monosilicide (CaSi) produces (SiH 2 ) x . CaSi consists of zigzag silicon chain with the formula (Si 2− ) n . This chain is preserved in the hydrolysis. This reaction was reported in 1921 by the German chemists Lothar Woehler (1870–1952) and Friedrich Mueller.

In 1923, German chemists Alfred Stock (1876–1946) and Friedrich Zeidler (1855–1931) found the (SiH) x polymer is formed along with silane gas by the action of sodium amalgam on dichlorosilane (SiH 2 Cl 2 ). The reaction is proposed to first produce the disodium dihydrogen silanide ( ) via a Wurtz-like reaction.

The dissolves in the mercury to generate the diradical SiH 2 , which then forms the final products. Polysilicon hydrides may also be produced by the dehalogenation of polysilicon halides. An illustrative reaction is the debromination of HSiBr 3 with Mg in ether: HSiBr 3 + 3/2 Mg → 1/x (SiH) x + 3/2 MgBr 2

Macromolecular structure

When n = 2 in (SiH n ) x , the polymer is termed polysilene, which has a quasi-one-dimensional (zigzag) chain structure in which each silicon atom is bonded to two other silicon skeletal atoms and two hydrogen atoms. Thus the Si atom is tetravalent (has four bonds).

If n = 1, quasi-two-dimensional (corrugated sheets) or random three-dimensional silicon networks termed polysilynes are obtained in which each silicon atom is bonded to three other silicon skeletal atoms and one hydrogen atom giving, again, a tetravalent Si atom. In the polysilenes and the polysilynes, the backbone is made exclusively of silicon atoms; the pendent- or side-groups, are not shared between skeletal atoms of the backbone chain.

Compression of silane itself under extremely high pressures (> 90 GPa) for long periods of time (~8 months) produces a material that differs from those shown above in that the silicon atoms are not bonded to one another but, rather, are connected via bridging hydrogen atoms. The silicon atoms are 8-fold coordinated by hydrogen (i.e. each silicon atom is bonded to 8 hydrogen atoms) forming a tetragonal structure.

Organic derivatives – polysilanes and polysilynes

When hydrogen atoms in linear polysilene are replaced with organic substituents, particularly alkyl and aryl groups, polysilanes are obtained. Although organosilicon polymers can be considered structural derivatives of polysilicon hydrides, they are not synthesized directly from them.

Traditionally, polysilanes are prepared by the Wurtz-like sodium or potassium metal-mediated reductive coupling (dehalogenation) of dihaloorganosilanes (R 2 SiX 2 ) in an inert solvent (e.g. toluene), very much like Burkhard's original method. Polysilynes have been similarly prepared from trihaloorganosilanes (RSiX 3 ).

See also

Polysilicon halides

Text derived from https://en.wikipedia.org/w/index.php?oldid=1361292921 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.