Polystannane

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Polystannanes are organotin compounds with the formula (R 2 Sn) n . These polymers have been of intermittent academic interest; they are unusual because heavy elements comprise the backbone. Structurally related but better characterized (and more useful) are the polysilanes (R 2 Si) n .

Polystannanes are organotin compounds with the formula (R 2 Sn) n . These polymers have been of intermittent academic interest; they are unusual because heavy elements comprise the backbone. Structurally related but better characterized (and more useful) are the polysilanes (R 2 Si) n .

History and synthesis

and (3) catalytic dehydropolymerization of tin dihydrides]] Oligo- or polystannanes were first described by Löwig in 1852, only 2 years after Edward Frankland's report on the isolation of the first organotin compounds. Löwig's route involved treating an Sn/K and Sn/Na alloys with iodoethane, in the presence of quartz sand which was used to control the reaction rate. Products with elemental compositions close to those of oligo(diethylstannane)s or poly(diethylstannane) were obtained. Cahours obtained similar products and attributed the formation of the so-called "stannic ethyl" to a reaction of the Wurtz type. Already in 1858, "stannic ethyl" was formulated as a polymeric compound denoted with the composition n(SnC 4 H 5 ). In 1917, Grüttner, who reinvestigated results on hexaethyl-distannanes(H 5 C 2 ) 3 Sn-Sn(C 2 H 5 ) 3 (reported by Ladenburg in 1870), confirmed the presence of Sn-Sn bonds and predicted for the first time that tin could form chain like compounds. In 1943, it was postulated that “diphenyltin” exists as a type of polymeric material because of its yellow color, and indeed a bathochromic shift of the wavelength at maximum absorption with increasing number of Sn atoms was found later in the case of oligo(dibutylstannane)s comprising up to 15 Sn atoms. The Wurtz reaction is still used for the preparation of poly(dialkylstannane)s. Treatment of dialkyltin dichlorides with sodium lead to polystannanes of high molar mass, however, in low yields and with formation of (cyclic) oligomers. Other efforts to prepare high molar mass polystannanes by electrochemical reactions or by catalytic dehydropolymerization of dialkylstannanes (R 2 SnH 2 ) were also made. Unfortunately, frequently, the polymers prepared by those methods were not isolated and typically contained significant fractions of cyclic oligomers. Alternatively, alkyltin halides react with excess electride in ammonia solutions to give metal alkylstannides. Added alkyltin halides then couple to the stannides to give polystannanes.

External links

Fabien Choffat (2007) Polystannane, Doctoral dissertation, Swiss Federal Institute of Technology, Zürich.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1364964230 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.