Polysulfone

.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

. Polysulfones are a family of high-performance thermoplastics. These polymers are known for their toughness and stability at high temperatures.

Technically used polysulfones contain an aryl-SO 2 -aryl subunit. Due to the high cost of raw materials and processing, polysulfones are used in specialty applications and often are a superior replacement for polycarbonates. Three polysulfones are used industrially: polysulfone (PSU), polyethersulfone (PES/PESU), and polyphenylsulfone (PPSU).

They can be used at temperature of and are used for electrical equipment, vehicle construction, and medical technology. They are composed of para-linked aromatics, sulfonyl groups, and ether groups and partly also alkyl groups. Polysulfones have outstanding resistance to heat, oxidation, hydrolysis, aqueous media, and alkaline media, and they have good electrical properties.

.]] Polysulfones are a family of high-performance thermoplastics. These polymers are known for their toughness and stability at high temperatures.

Technically used polysulfones contain an aryl-SO 2 -aryl subunit. Due to the high cost of raw materials and processing, polysulfones are used in specialty applications and often are a superior replacement for polycarbonates. Three polysulfones are used industrially: polysulfone (PSU), polyethersulfone (PES/PESU), and polyphenylsulfone (PPSU).

They can be used at temperature of and are used for electrical equipment, vehicle construction, and medical technology. They are composed of para-linked aromatics, sulfonyl groups, and ether groups and partly also alkyl groups. Polysulfones have outstanding resistance to heat, oxidation, hydrolysis, aqueous media, and alkaline media, and they have good electrical properties.

Historical

The simplest polysulfone, poly(phenylene sulfone), known as early as 1960, is produced in a Friedel-Crafts reaction from benzenesulfonyl chloride: With a melting point over 500 °C, the product is difficult to process. It exhibits attractive heat resistance, but its mechanical properties are rather poor. Polyarylether sulphones (PAES) represent a suitable alternative.

Appropriate synthetic routes to PAES were developed almost simultaneously, and yet independently, from 3M Corporation, Union Carbide Corporation in the United States, and ICI's Plastics Division in the United Kingdom. The polymers found at that time are still used today, but produced by a different synthesis process.

The original synthesis of PAES involved electrophilic aromatic substitution of a diaryl ether with the bis (sulfonyl chloride) of benzene. Reactions typically use a Friedel-Crafts catalyst, such as ferric chloride or antimony pentachloride: This route is complicated by the formation of isomers arising from both para- and ortho- substitution.

Furthermore, cross-linking was observed, which strongly affects the mechanical properties of the polymer. This method has been abandoned.

Contemporary production methods

PAES are currently prepared by a polycondensation reaction of diphenoxide and bis(4-chlorophenyl)sulfone (DCDPS). The sulfone group activates the chloride groups toward substitution. The required diphenoxide is produced in situ from a diphenol and sodium hydroxide.

The cogenerated water is removed by azeotropic distillation using toluene or chlorobenzene). The polymerization is carried out at 130–160 °C under inert conditions in a polar, aprotic solvent, such as dimethyl sulfoxide, forming a polyether concomitant with elimination of sodium chloride: Bis(4-fluorophenyl)sulfone can be used in place of bis(4-chlorophenyl)sulfone.

The difluoride is more reactive than the dichloride but more expensive. Through chain terminators (e.g. methyl chloride), the chain length can be controlled for melt-processing. The diphenol is typically bisphenol-A or 1,4-dihydroxybenzene.

Such step polymerizations require highly pure monomer and precise stoichiometry to ensure high-molecular-weight products. DCDPS is the precursor to polymers known as Udel (from bisphenol A), PES, and Radel R. Udel is a high-performance amorphous sulfone polymer that can molded into a variety of different shapes.

It is both rigid and temperature-resistant, and has applications in everything from plumbing pipes, to printer cartridges , to automobile fuses. DCDPS also reacts with bisphenol S to form PES. Like Udel, PES is a rigid and thermally-resistant material with numerous applications.

Applications

Polysulfone has one of the highest service temperatures among all melt-processable thermoplastics. Its resistance to high temperatures gives it a role of a flame retardant, without compromising its strength that usually results from addition of flame retardants. Its high hydrolysis stability allows its use in medical applications requiring autoclave and steam sterilization.

However, it has low resistance to some solvents and undergoes weathering; this weathering instability can be offset by adding other materials into the polymer.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1344791817 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

2 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.