Polytropic process

A polytropic process is a thermodynamic process that obeys the relation: p V^{n} = C where p is the pressure, V is volume, n is the polytropic index, and C is a constant.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A polytropic process is a thermodynamic process that obeys the relation: p V^{n} = C where p is the pressure, V is volume, n is the polytropic index, and C is a constant. The polytropic process equation describes expansion and compression processes which include heat transfer.

Particular cases

Some specific values of n correspond to particular cases: n=0 for an isobaric process, n=+\infty for an isochoric process. In addition, when the ideal gas law applies: n=1 for an isothermal process, n=\gamma for an isentropic process. Where \gamma is the ratio of the heat capacity at constant pressure ( C_P ) to heat capacity at constant volume ( C_V ).

Equivalence between the polytropic coefficient and the ratio of energy transfers

For an ideal gas in a closed system undergoing a slow process with negligible changes in kinetic and potential energy the process is polytropic, such that p v^{(1- \gamma)K + \gamma} = C where C is a constant, K = \frac{\delta q}{\delta w} , \gamma = \frac{c_p}{c_v} , and with the polytropic coefficient

Relationship to ideal processes

For certain values of the polytropic index, the process will be synonymous with other common processes. Some examples of the effects of varying index values are given in the following table. When the index n is between any two of the former values (0, 1, γ, or ∞), it means that the polytropic curve will cut through (be bounded by) the curves of the two bounding indices.

For an ideal gas, 1  \gamma = \frac{c_p}{c_v} = \frac{c_v+R}{c_v} = 1+\frac{R}{c_v} = \frac{c_p}{c_p-R}.

Other

A solution to the Lane–Emden equation using a polytropic fluid is known as a polytrope. The term "polytropic poison" has been used exclusively in publications from Russia regarding lead poisoning and chloroprene to indicate multisystemic toxic effects. In entomology it has been used to denote insects visiting various flowers for nectar.

See also

Adiabatic process Compressor Internal combustion engine Isentropic process Isobaric process Isochoric process Isothermal process Polytrope Quasistatic equilibrium Thermodynamics Vapor-compression refrigeration

Text derived from https://en.wikipedia.org/w/index.php?oldid=1340992645 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.