Polyurethane dispersion
Polyurethane dispersion, or PUD, is understood to be a polyurethane polymer resin dispersed in water, rather than a solvent, although some cosolvent may be used.
≈ 4 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Polyurethane dispersion, or PUD, is understood to be a polyurethane polymer resin dispersed in water, rather than a solvent, although some cosolvent may be used. Its manufacture involves the synthesis of polyurethanes having carboxylic acid functionality or nonionic hydrophiles like PEG (polyethylene glycol) incorporated into, or pendant from, the polymer backbone. Two component polyurethane dispersions are also available.
Weaknesses and disadvantages
Although they are perceived to have good environmental credentials waterborne polyurethane dispersions tend to suffer from lower mechanical strength than other resins. The use of polycarbonate based polyols in the synthesis can help overcome this weakness. The wear and corrosion resistance is also not as good and hence they are often hybridized.
Other strategies used to overcome some of the weaknesses include molecular design and mixing/compounding with inorganic rather than polymeric materials. The use of an anionic or cationic center or indeed a hydrophilic non-ionic manufacturing technique tends to result in a permanent inbuilt water resistance weakness.
Research is being conducted and techniques developed to combat this weakness. Simple blending has also been employed.
This has the advantage in that if no new molecule has been formed but merely blending with existing registered raw materials, then that is a way around the work required to get registration of the material under various country regimes such as REACH in Europe and TSCA in the United States. Because of the surface tension of water being so high, pinholes and other problems of air-entrainment tend to be more common and need special additives to combat.
They also tend not to be manufactured with biobased polyols because vegetable based polyols don't have performance enhancing functional groups. Modification is possible to achieve this and enable even greener versions. Drying, curing and cross-linking is also not usually as good and hence research is proceeding in the area of post crosslinking to improve these features.
Hybrids
The disadvantages of PUDs are being improved by research. Hybridization using other materials and techniques is one such area. PUDs that are waterborne and UV curable are being intensely researched with well over 100 research papers produced in the 2000-2020 time period.
Waterborne PUD- Acrylates based on epoxidized soybean oil that is also UV curable have been produced and are feasible. The nature of the acrylate affects the properties. One use of hybrids is in textile finishes.
As ionic centers are introduced with waterborne PUDs, the water resistance and uptake in the final film has been studied extensively. The nature of the polyol and the level of COOH groups and hydrophobic modification with other moieties can improve this property. Polyester polyols give the biggest improvements.
Polycarbonate polyols also enhance properties, especially if the polycarbonate is also fluorinated. Reinforcing PUDs with nanomaterials also improves properties, as does silicone modification. To make PUDs more hydrophobic and water repellent and thus remove a weakness, a number of techniques have been researched.
One way is to add hydroxyethyl acrylate to the polyol reacting with isocyanate. Once the PUD is made it will have terminal double bond functionality from the acrylate. This may now be copolymerized with a very hydrophobic acrylate such as stearyl acrylate using free radical techniques.
This long alkyl chain introduced confers hydrophobicity. Another method of hybridization is to make a PUD that is both anionic but with a very substantial nonionic modification utilizing a polyether polyol based on ethylene oxide. In addition, a silicone diol maybe incorporated.
As epoxy resins have some outstanding properties, research using epoxy to modify PUD is taking place. PUDs that are based on thiol rather than hydroxyl and also modified with both acrylate as well as epoxy functionality have been produced and researched. As PUDs are resin dispersed in water, when cast as a film and dried they are inherently high gloss.
They can be designed to be matte/flat by incorporating siloxane functionality. Since PUDs are usually considered green and environmentally friendly, techniques being researched also include capturing carbon dioxide from the atmosphere to make the raw materials and then further synthesis.
See also
Coatings Polymer science Synthetic resin Water Waterborne resins BASF Perstorp Range Incorez range Halox includes formulations DOW literature with overview
Text derived from https://en.wikipedia.org/w/index.php?oldid=1378612296 under CC BY-SA 4.0; modifications have been made.