Population inversion
In physics, specifically statistical mechanics, a population inversion occurs when a system (such as a group of atoms or molecules) exists in a state in which more members of the system are in higher, excited states than in lower…
≈ 5 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
In physics, specifically statistical mechanics, a population inversion occurs when a system (such as a group of atoms or molecules) exists in a state in which more members of the system are in higher, excited states than in lower, unexcited energy states. It is called an "inversion" because in many familiar and commonly encountered physical systems in thermal equilibrium, this is not possible.
This concept is of fundamental importance in laser science because the production of a population inversion is a necessary step in the workings of a standard laser. N_1+N_2 = N The energy difference between the two states, given by \Delta E_{12} = E_2-E_1, determines the characteristic frequency of light which will interact with the atoms; This is given by the relation E_2-E_1 = \Delta E_{12} = h\nu_{12}, being the Planck constant.
If the group of atoms is in thermal equilibrium, it can be shown from Maxwell–Boltzmann statistics that the ratio of the number of atoms in each state is given by the ratio of two Boltzmann distributions, the Boltzmann factor: \frac{N_2}{N_1} = \frac{g_2}{g_1}\exp{\frac{-(E_2-E_1)}{kT}}, where is the thermodynamic temperature of the group of atoms, is the Boltzmann constant and and are the degeneracies of each state. Calculable is the ratio of the populations of the two states at room temperature ( ≈ 300 K) for an energy difference that corresponds to light of a frequency corresponding to visible light ( ≈ ).
In this case ≈ 2.07 eV, and ≈ 0.026 eV. Since , it follows that the argument of the exponential in the equation above is a large negative number, and as such is vanishingly small; i.e., there are almost no atoms in the excited state.
When in thermal equilibrium, then, it is seen that the lower energy state is more populated than the higher energy state, and this is the normal state of the system. As increases, the number of electrons in the high-energy state ( ) increases, but never exceeds for a system at thermal equilibrium; rather, at infinite temperature, the populations and become equal.
In other words, a population inversion ( ) can never exist for a system at thermal equilibrium. To achieve population inversion therefore requires pushing the system into a non-equilibrated state.
N_2(t) = N_2(0) \exp{\frac{-t}{\tau_{21}}}, where is the number of excited atoms at time , and is the mean lifetime of the transition between the two states. \nu_{13} \,=\, \frac{1}{h}\left(E_3 - E_1\right), the process of optical absorption will excite electrons from level 1 to level 3. There are also methods not directly involving light absorption; such as electrical discharge or chemical reactions.
The level 3 is sometimes referred to as the pump level or pump band, and the energy transition as the pump transition (labeled transition P in the diagram on the right). Upon pumping the medium, an appreciable number of atoms will transition to level 3, such that . To have a medium suitable for laser operation, it is necessary that these excited atoms quickly decay to level 2.
The energy released in this transition may be emitted as a photon (spontaneous emission). However, in practice, the transition is usually non-radiative (labeled transition R in the diagram), with the energy being released as phonons and transferred to vibrational motion (heat) of the host material surrounding the atoms, without the generation of a photon.
This phenomenon is sometimes called collisional deactivation. An electron in level 2 may decay by spontaneous emission to level 1, releasing a photon of frequency (given by ), which is called the laser transitions (labelled transition L in the diagram).
If the lifetime of this transition, is much longer than the lifetime of the non-radiative transition (if , known as a favourable lifetime ratio), the population of the will be essentially zero ( ) and a population of excited state atoms will accumulate in level 2 ( ). If over half the N atoms can be accumulated in this state, this will exceed the population of the ground state .
A population inversion ( ) has thus been achieved between level 1 and 2, and optical amplification at the frequency can be obtained. Because at least half the population of atoms must be excited from the ground state to obtain a population inversion, the laser medium must be very strongly pumped.
This makes three-level lasers rather inefficient, despite being the first type of laser to be discovered (based on a ruby laser medium, by Theodore Maiman in 1960). A three-level system could also have a radiative transition between level 3 and 2, and a non-radiative transition between 2 and 1. In this case, the pumping requirements are weaker.
In practice, most lasers are four-level lasers, described below.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1356104108 under CC BY-SA 4.0; modifications have been made.