Lesson plan

Port Control Protocol

Port Control Protocol (PCP) is a computer networking protocol that allows hosts on IPv4 or IPv6 networks to control how the incoming IPv4 or IPv6 packets are translated and forwarded by an upstream router that performs network address translation (NAT) or packet filtering. By allowing hosts to create explicit port forwarding rules, handling of the network traffic can be easily configured to make hosts placed behind NATs or firewalls reachable from the rest of the Internet (so they can also act as network servers), which is a requirement for many applications. Additionally, explicit port forwarding rules available through PCP allow hosts to reduce the amount of generated traffic by eliminating workarounds in form of outgoing NAT keepalive messages, which are required for maintaining connections to servers and for various NAT traversal techniques such as TCP hole punching. At the same time, less generated traffic reduces the power consumption, directly improving the battery runtime for mobile devices. PCP was standardized in 2013 as RFC6887, a successor to the NAT Port Mapping Protocol (NAT-PMP), with which it shares similar protocol concepts and packet formats. PCP adds support for IPv6 and additional NAT scenarios. In environments where a UPnP IGD is used in the local network, an interworking function between the UPnP IGD and PCP is required to be embedded in the IGD.…

Back to article

Article summary

Port Control Protocol (PCP) is a computer networking protocol that allows hosts on IPv4 or IPv6 networks to control how the incoming IPv4 or IPv6 packets are translated and forwarded by an upstream router that performs network address translation (NAT) or packet filtering. By allowing hosts to create explicit port forwarding rules, handling of the network traffic can be easily configured to make hosts placed behind NATs or firewalls reachable from the rest of the Internet (so they can also act as network servers), which is a requirement for many applications. Additionally, explicit port forwarding rules available through PCP allow hosts to reduce the amount of generated traffic by eliminating workarounds in form of outgoing NAT keepalive messages, which are required for maintaining connections to servers and for various NAT traversal techniques such as TCP hole punching. At the same time, less generated traffic reduces the power consumption, directly improving the battery runtime for mobile devices. PCP was standardized in 2013 as RFC6887, a successor to the NAT Port Mapping Protocol (NAT-PMP), with which it shares similar protocol concepts and packet formats. PCP adds support for IPv6 and additional NAT scenarios. In environments where a UPnP IGD is used in the local network, an interworking function between the UPnP IGD and PCP is required to be embedded in the IGD.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.