{
  "id": "enwiki-001371102145",
  "slug": "post-processor",
  "title": "Post processor",
  "qid": "",
  "lead": "A post processor, also known simply as a post, is a computer program which converts tool path data from CNC software into machine tool data, to be used in CAM systems. A post processor generates the G-code used by the machine control module. The generated code will differ for each G-code dialect the post-processor supports, and will often be customized to match the limitations of the machine. Post processors can be either open- or closed-source software; closed-source posts are usually created by CAM vendors, while open-source ones are made by the community or home users. It can be difficult, however, to custom-write post-processors, as the code syntax used by the machine often varies; several efforts have been made to create a standard language. Post-processors can be generic (being programmed for one machine) machine-specific, or custom-built. Post processors can also be used to auto-create pocket routines or, in specific cases, run robots using G-code instructions.",
  "body": "A post processor, also known simply as a post, is a computer program which converts tool path data from CNC software into machine tool data, to be used in CAM systems. A post processor generates the G-code used by the machine control module. The generated code will differ for each G-code dialect the post-processor supports, and will often be customized to match the limitations of the machine. Post processors can be either open- or closed-source software; closed-source posts are usually created by CAM vendors, while open-source ones are made by the community or home users. It can be difficult, however, to custom-write post-processors, as the code syntax used by the machine often varies; several efforts have been made to create a standard language. Post-processors can be generic (being programmed for one machine) machine-specific, or custom-built. Post processors can also be used to auto-create pocket routines or, in specific cases, run robots using G-code instructions. ==See also== Preprocessor Transpiler PostCSS ==References==",
  "categories": [
    "10363069",
    "23118434",
    "23468805",
    "23603337",
    "33222019",
    "41697874"
  ],
  "license": "CC BY-SA 4.0",
  "source_uri": "https://en.wikipedia.org/w/index.php?oldid=1371102145",
  "content_hash": "",
  "created_at": null,
  "updated_at": 1787579957.0,
  "claims": [],
  "contradictions": [],
  "confidence": 0.6,
  "csl": {
    "id": "enwiki-001371102145",
    "type": "webpage",
    "title": "Post processor",
    "author": [
      {
        "family": "Anticloud FZ LLE",
        "literal": "Anticloud FZ LLE"
      }
    ],
    "container-title": "encyclopegia.org",
    "publisher": "Anticloud FZ LLE",
    "publisher-place": "Dubai, United Arab Emirates",
    "URL": "https://encyclopegia.org/a/post-processor",
    "issued": {
      "date-parts": [
        [
          2026,
          11,
          18
        ]
      ]
    },
    "accessed": {
      "date-parts": [
        [
          2026,
          11,
          18
        ]
      ]
    },
    "license": "CC BY-SA 4.0",
    "DOI": "eo1:enwiki-001371102145",
    "isBasedOn": "https://en.wikipedia.org/w/index.php?oldid=1371102145",
    "note": "Immutable snapshot enwiki-001371102145"
  }
}