power MOSFET

power MOS field-effect transistor

Uses your system voice; voice and rate in settings.

≈ 4 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

  • FrançaisMOSFET à puissance significative
  • ItalianoMOSFET di potenza
  • DeutschLeistungs-MOSFET
  • daEffekt MOSFET
  • Englishpower MOSFET
  • हिन्दीशक्ति मॉसफेट
  • 日本語パワーMOSFET
  • 한국어전력 MOSFET

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

AB through-hole package. Pins from left to right are: gate (logic-level), drain, source. The top metal tab is the drain, same as pin 2.

A power MOSFET is a type of metal–oxide–semiconductor field-effect transistor (MOSFET) designed to handle significant power levels. Compared to the other power semiconductor devices, such as an insulated-gate bipolar transistor (IGBT) or a thyristor, its main advantages are high switching speed and good efficiency at low voltages.

It shares with the IGBT an isolated gate that makes it easy to drive. They can exhibit low gain, sometimes to the extent that the gate voltage needs to be higher than the voltage being controlled. The design of power MOSFETs was made possible by the evolution of MOSFET and CMOS technology, used for manufacturing integrated circuits since the 1960s.

The power MOSFET shares its operating principle with its low-power counterpart, the lateral MOSFET. The power MOSFET, which is commonly used in power electronics, was adapted from the standard MOSFET and commercially introduced in the 1970s.

The power MOSFET is the most common power semiconductor device in the world, due to its low gate drive power, fast switching speed, easy advanced paralleling capability, wide bandwidth, ruggedness, easy drive, simple biasing, ease of application, and ease of repair. In particular, it is the most widely used low-voltage (less than 200 V) switch.

It can be found in a wide range of applications, such as most power supplies, DC-to-DC converters, low-voltage motor controllers, and many other applications. \begin{matrix} C_{iss} & = & C_{GS}+C_{GD}\\ C_{oss} & = & C_{GD}+C_{DS}\\ C_{rss} & = & C_{GD} \end{matrix} Where C GS , C GD and C DS are respectively the gate-to-source, gate-to-drain and drain-to-source capacitances (see below). Manufacturers prefer to quote C iss , C oss and C rss because they can be directly measured on the transistor.

However, as C GS , C GD and C DS are closer to the physical meaning, they will be used in the remaining of this article. C_{GD}=\frac{C_{oxD}\times C_{GDj}\left(V_{GD}\right)}{C_{oxD}+ C_{GDj}\left(V_{GD}\right)} The width of the space-charge region is given by w_{GDj}=\sqrt{\frac{2\epsilon_{Si}V_{GD}}{qN}} where \epsilon_{Si} is the permittivity of the Silicon, q is the electron charge, and N is the doping level.

The value of C GDj can be approximated using the expression of the plane capacitor: C_{GDj}=A_{GD}\frac{\epsilon_{Si}}{w_{GDj}} Where A GD is the surface area of the gate-drain overlap. Therefore, it comes: C_{GDj}\left(V_{GD}\right)=A_{GD}\sqrt{\frac{q\epsilon_{Si}N}{2V_{GD}}} It can be seen that C GDj (and thus C GD ) is a capacitance whose value is dependent upon the gate-to-drain voltage.

As this voltage increases, the capacitance decreases. When the MOSFET is in on-state, C GDj is shunted, so the gate-to-drain capacitance remains equal to C oxD , a constant value.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1338274732 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot power-mosfet-065533-0a7af9678b9181ba · hash 0a7af9678b9181baab3f1aaeae5400acafccf8a4ffafd1c625f8140ac7054cfa · captured 2026-02-14 · ledger · version history

Cite this page as: encyclopegia.org, “power MOSFET”, snapshot power-mosfet-065533-0a7af9678b9181ba. https://encyclopegia.org/a/power-mosfet

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.